try peeling it off very carefully, you can use a heat gun to heat up the sticker also. just try picking at it with your fingernails that usally works. ;)
What is the best way to take off the little dealer sticker that they put on without disrupting the paint job? Just bought my EP3 and I realize that this needs to go, I want to do this soo because I'm Washing and waxing her this week.
TIA,
-Rob
try peeling it off very carefully, you can use a heat gun to heat up the sticker also. just try picking at it with your fingernails that usally works. ;)
thanx... I just wanted to make sure I wasn't gonna mess anything up
-Rob
Personally, I used a hair dryer. Heat guns can be terrible on your paint.
Mel
The hair dryer worked good? Should I wet the sticker first?
blow dryer,
goo gone,
finger nail,
peel,
wax.
and your all good to go
Did kind of the same :)Originally posted by Ep3 No.2
blow dryer,
goo gone,
finger nail,
peel,
wax.
and your all good to go
blow dryer,
goo gone,
wax.
Mel
heh, I noticed my dealer had one on mine as well. Luckily it wasn't that strong of a stick so I just peeled it off and the paint didn't chip or get stuck to the sticker. There was an outline afterward, but one car wash took that right away. :)
I took off the dealer badge with a hair dryer, when it was about 20 degrees F outside. Just heat it up, and the badge comes right off. I had the Goo Gone ready, but it didn't leave any residue, all of it came off with the badge. Just waxed the area. I slapped the badge onto some magnetic sheeting, and put it on my fridge :)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks