Close

Results 1 to 15 of 27

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I like turtles! Gearhead Geek's Avatar
    Join Date
    Feb 2004
    Location
    Earth
    Posts
    386

    Gearhead Geek & Anjapower dyno #'s 5/1/04

    Power mods:
    K&N SRI
    DC SS Shorty Header
    Megan Racing Test Pipe
    Invidia Catback
    A2 Head + ECU
    Ground wires

    My numbers:
    Run 1 (3rd gear): 177.43hp, 124.98tq
    Run 2 (3rd gear): 177.41hp, 124.91tq
    Run 3 (4rd gear): 164.67hp, 123.26tq
    Run 4 (3rd gear): 171.88hp, 121.86tq
    Run 5 (3rd gear): 172.59hp, 121.28tq
    Run 6 (3rd gear): 168.24hp, 123.13tq
    Average of 3rd gear runs: 173.51hp, 123.232tq

    The charts below show the temperature increase durring the time of the runs, which is more than likely the cause of the numbers getting lower. Also keep in mind that this is completely untuned, the K-Pro won't be in the car for another week or two ;) (And to all those who were talking smack about my 1/4 mile times, I told you I was a bad driver, falling out of VTEC hurts, and having rims that weigh 20lbs before adding tires on doesn't help much either ;) )

    Runs 1&2:


    Runs 3&4:


    Runs 5&6:


    -----------------
    Anjapower's #'s
    -----------------
    Power mods:
    AEM CAI
    Comptech Race Header
    Comptech catback
    Hondata flash

    Run 1 had blank spots/spikes, so it won't be posted
    Run 2 had the same, so I won't post numbers, but you can see it in the charts below
    Run 3: 165.23hp, 135.40tq
    Run 4: 165.68hp, 135.50tq
    Run 5: 162.75hp, 133.84tq

    Runs 2&3:


    Runs 4&5:


    ---------------------------
    Meet pictures and Dyno movies comming soon in the Meet Pictures section.
    Last edited by Gearhead Geek; 05-01-2004 at 03:31 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •