Nice i like it, good job. hey can i have some of your yahoo.:p
As soon as I purchased my EP, I noticed that the area where the cig. lighter and cupholder are is really dark when you're driving along at night. I know that a lot of high end cars have ambient lighting (sort of like a "glow" about certain areas) which switches on and off with the lights. I found that the area right where the cig. lighter is has a large blank space where an LED could be mounted and could illuminate the area with a faint red glow. Here are some installation instructions. You will need:
*Drill
*Drill Bit (I cannot recall the size, but the LED package tells you what size)
*1 LED with holder, from Radio Shack. It's $1.99, has a red LED in it, and an inline resistor so you can connect it directly to a 12v source without burning it out. Part #2760084 ONLY.
*2' length of cable, for positive and negative leads.
here's a photo of the hole drilled. You can see that once the panel is back in place, the LED or hole will not be visible.
Closer view of the drilled hole.
The LED should look like this when you've pushed it in..
Feed the wire up through the hole, in front of the shifter, up next to the hazard light plug. That plug will have the correct wire to plug into, so that the LED will only be on when the interior lights are on.
Here's a closeup of the plug with the pos./neg. wires attached. ONE POINT OF CLARIFICATION: I would recommend using the ground from the cig. lighter plug, because for some reason the LED shines brighter when you use that. For power, use the wire that is red with a black stripe. I would recommend double checking this with a light tester
put everything back together, and it should look something like this. :) (sorry for the shitty pics)
It's very subtle, but it does help. :)
Nice i like it, good job. hey can i have some of your yahoo.:p
:D I was working so hard to get done with the mod, that i forgot to drink it all. :D You can have the rest.Originally posted by PaXiE
Nice i like it, good job. hey can i have some of your yahoo.:p
Very Nice! I wonder if you can get amber LEDs.
I'm sure you can, I was just limited to what was available at Radio Shack. They told me that the amount of small goods that they carry like that has really been cut down.
Oh, and just for grins, i installed this over the weekend as well. I will say that a kit will make all the difference, because as it stands, you can see a gap over the stereo. :\
looks good, i wish i had my kenwood ... :( touch screen dvd.
Nice personal touch man. Wish I had the time and patience to do this stuff.
I dunno, sometimes little things like this can cure the urge to spend money on mods and things like that... for the time being these are all I can really afford to do. :D
I hear that! I'll be getting new Honda "H's" and painting them gun metal to replace the stock ones(might even put the civic badge back on). I'll also be getting some cahones and will be painting my stock lights. I'm just scared I'm going to jack up a light and have to shell out some cash for them.
BTW--Very cool install!
Steve
Nice job on the LED. I put one in the secret compartment, my LED had three seperate lights on it and they look clear. I mounted it on the drink holder, on the back of it so you can see what you are picking up and you can get rid of the light when you close the sliding door.:D
that is a nice personal touch-good job
thats pretty cool keep up the good work
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks