First tell me why your are plugging the shift knob up?
hey i was wondering where you can plug in a shift knob to get 12v power out of it. the wires are pretty short, about 6 or 7 inches so it has to be some place close. thanks.
First tell me why your are plugging the shift knob up?
Well I don't really agree with the "neon" shift knob but it you want to do it you are going to have to buy some more wire.
1. Splice the wires together.
2. If the wires run out the bottom of the knob then just run them straight down into the shift boot.
3. I would just attach it to the 12v source that powers the 12v outlet below the shifter.
hey no hating. it's not a "neon" el glow shift knob, its one of the type r ones that lights up the gears.
LINK
yeah, thats a helluva lot better.;) :DOriginally posted by silvaep3rider
hey no hating. it's not a "neon" el glow shift knob, its one of the type r ones that lights up the gears.
LINK
I'd rather pay the company to stop making these then buy one !
depends on how much current it draws, either the cigarette terminal or use an ad a fuse in the fuse block
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks