Close

Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Base Rsx Jrsc

  1. #1
    Registered User
    Join Date
    Sep 2002
    Location
    SoCal
    Posts
    49

    Base Rsx Jrsc

    Crappy quality but this would have to do for now. "Just to give you guys an idea"

    -Granny shifting
    -No camera man
    -Holding the camera in left hand and shifting with right hand
    -Launched at idle with only about 60% throttle in 1st gear (I can't get traction if I flowed it)
    -Shut down after shifting to 3rd gear because didn't want to drive from 0-95mph without hands on steering wheel.
    -It's a dead empty street with one one around
    -The camera was blocking my eye view of the tach, I had to shift by looking through the 1.5" view finder of the camera (not real time)
    -Windows were all up
    -18" wheels

    RIGHT CLICK AND SAVE AS
    http://www.we-todd-did-racing.com/we...NkZmQzMXk1NDE=

    Last edited by TheAnhDy; 06-11-2004 at 01:22 AM.

  2. #2
    sippin haterade johnkimble's Avatar
    Join Date
    Nov 2003
    Location
    714/949/760
    Posts
    618
    edit: Save his bandwith, click HERE
    Last edited by johnkimble; 06-11-2004 at 01:11 AM.

  3. #3
    Registered User
    Join Date
    Sep 2002
    Location
    SoCal
    Posts
    49
    thank you for hosting

  4. #4
    sippin haterade johnkimble's Avatar
    Join Date
    Nov 2003
    Location
    714/949/760
    Posts
    618
    sweet video btw... do you jrsc guys have trouble with traction? sounds like it gets squeely at high rpms even in 1st gear?

  5. #5
    SF-SI-02
    Guest
    You have hondata right? Or does the rsx ecu allow you to get to 60 in second stock? I tried timing it with my watch (I know pathetic) but I had a hard time getting your 0-60 over 5 seconds... what else have you done to that beast?

    Thanks

  6. #6
    Registered User
    Join Date
    Sep 2002
    Location
    SoCal
    Posts
    49
    Originally posted by SF-SI-02
    You have hondata right? Or does the rsx ecu allow you to get to 60 in second stock? I tried timing it with my watch (I know pathetic) but I had a hard time getting your 0-60 over 5 seconds... what else have you done to that beast?

    Thanks
    I wasn't trying to launch the car other wise I would have no traction. I started moving at idle with about 60% throttle. I never floored it in 1st otherwise I would lose traction and spin out forever. I wasn't trying to do a good 0-60 run because I was shifting fairly slow. The video is just to give you an idea of the jrsc whining and tach moving

    These are my mods

    2002 Acura RSX

    ENGINE
    Jackson Racing Supercharger Race Version
    RC 440cc Fuel Injectors
    Hondata K-Pro Programmable ECU
    Hondata Intake Manifold Heat Gasket
    AEM cold air intake
    Jackson Racing Race Header + Testpipe
    RSX Type S Exhaust
    Energy Suspension Motor Mount Inserts
    Revotechnica short shifter
    Ground wire
    Throttle Body Coolant Bypass

    EXTERIOR
    JDM style black headlights
    JDM Integra Type R lip
    Type Zero side skirts
    OEM rear underspoiler
    VIS Carbon Fiber Hood
    Redout tail lights

    INTERIOR
    Autometer Air/Fuel Ratio gauge
    Autometer Boost/Vacuum gauge
    Axas Shift Light
    Aluminum Dash Trim

    WHEELS/SUSPENSION
    Eibach Sportline Springs
    Ingalls camber kit
    Progress Rear Sway and Tie Bar
    Autotechnic Upper Front Strut Bar
    Autotechnic Rear Strut Bar
    5-Zigen FNO1R-C 18x7.5
    Toyo Tires 225/40/18

    SOUND/VIDEO
    Pioneer 8400MP head unit
    JBL 300.1 mono amp
    Alpine Type R 12" sub
    Subzero sealed enclosure










    Last edited by TheAnhDy; 06-11-2004 at 08:43 PM.

  7. #7
    ephatch member
    Join Date
    Sep 2003
    Location
    Glendale ,CA
    Posts
    121
    dude your car is pimp!!! i love where you put the gauges. hey does the jrsc race version fit on ep's ? and how much did you pay for it and what do you think your 1/4 times are ? nice ride dude.

  8. #8
    Registered User
    Join Date
    Sep 2002
    Location
    SoCal
    Posts
    49
    Originally posted by Jonny221
    dude your car is pimp!!! i love where you put the gauges. hey does the jrsc race version fit on ep's ? and how much did you pay for it and what do you think your 1/4 times are ? nice ride dude.
    It's not production model. I have the prototype because I was the test car. It's not released yet. It's a base rsx not a type s

  9. #9
    ephatch member
    Join Date
    Sep 2003
    Location
    Glendale ,CA
    Posts
    121
    i know its a base what do you think the 1/4 times will be becasue im trying to decided on jrsc or turbo do you think u will be in the 13.9999 ? is it just awesome or wat ?

  10. #10
    Registered User eurosteez's Avatar
    Join Date
    Jul 2003
    Location
    HB CA
    Posts
    1,059
    cleanest rsx I've seen;)

  11. #11
    zzzzzz myeverlovinsir's Avatar
    Join Date
    Aug 2002
    Location
    staring at the red light
    Posts
    2,377
    That setup won't fit in the EP. It's laying flat. Ours is a shorter engine bay and that manifold and layout would interfere. I also noticed that the RSX fuel rail has the connection with the large hex nut and (don't know what its called) on the right side. Our fuel rail has that in the middle where the indent on the maifold is shown in your pic. It's a problem to fit our rail properly with larger RC injectors because of it. Clean ride.;)

  12. #12
    ephatch member
    Join Date
    Sep 2003
    Location
    Glendale ,CA
    Posts
    121
    HEy TheAnhDy guy with the clean rsx do you live in Tujunga ? If so do you live by Ron Depompa ?

  13. #13
    Registered User
    Join Date
    Sep 2002
    Location
    SoCal
    Posts
    49
    Originally posted by Jonny221
    HEy TheAnhDy guy with the clean rsx do you live in Tujunga ? If so do you live by Ron Depompa ?
    Nope

  14. #14
    ephatch member
    Join Date
    Sep 2003
    Location
    Glendale ,CA
    Posts
    121
    what Socal city do you live in ? I live in Glendale i want to check out your ride. If your close to me.

  15. #15
    Registered User schreff's Avatar
    Join Date
    Jun 2004
    Location
    Harrisburg, PA
    Posts
    32
    Nice whip, very clean.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •