Reply With Quoteive always liked that whole clean dash look, but does anyone else think its kinda...ehhh, boring? i mean, you could probably spend 100 bucks and get a nice LCD and bondo it in there. that would be sweet. IMHO
Just a thought... if you're thinking about doing this, and you're not using the hole to the right side of the shift lever, it might be worthwhile to fill that as well while you've got the tub 'o bondo open.
Ma+hman.
ive always liked that whole clean dash look, but does anyone else think its kinda...ehhh, boring? i mean, you could probably spend 100 bucks and get a nice LCD and bondo it in there. that would be sweet. IMHO
Formerly known as Plainol2k2si
Yea.Originally Posted by plainol2k2si
I think 7" monitor would fit perfectly in there.
But then you would relocate CD player..
That's another new project.
I am going to resand one more time tommrrow and look for new spray paint.
or..... put in a modded PS2 and connect it to the LCD. That's my plan. Well, until I can find a place to mount it.
That look so hot if you put a Alpine IVA-D900 Car Audio Video and connect the xbox in to the LCD., replace all JL speaker, with 500w. amp for the speaker and 1000w. for the 12"w7 hahah that's kick ass right there that's my stuff there hahaha :tongue: I want to put the ps2 in too but no room =[
i was wondering where did you get your shift boot and fhor how much
ebay used to have them.
Formerly known as Plainol2k2si
It is a Integra Type R boot. I bought it off this board used but I know you can get them online just not sure were.
www.optauto.com got them
It's not done... haha
i-WERKS
How did you make new bracket for back of the cd player.
Last edited by Civicvtec1ps; 06-24-2004 at 08:30 PM.
Not bad. Are you going to paint the bottom black too?
I think so.
But i still need to finish sanding once again.
looks good paul.... i dont have the testicular fortituded to mess with that.... i know if it attempted it it would be all lumpy and shit.. looks good.. but i used the little bin under cdplayer to much to get rid of it..looks nice!! keep progress posted!
joHn
I just ran into a problem. In the corners the bondo is coming up. That is were the bondo is the heavest so I think that is the problem. I was going to do the finish sanding this weekend, but I guess I am going to have to learn how to work with fiberglass to fill in that big gap at the top and bottom.
I think what caused the problem was the heavy bondo and this week it is getting hot and humid and in my car it was well over 100+ and humid.
Bondo isn't too good with plastic...
It is going to crack in the future. most likely.
Last edited by Civicvtec1ps; 07-11-2004 at 11:56 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks