they are all the same. from 02-04 ep3. how much u getting yours for?
part number DSA22-LUSS2 is also made for the 01+ civics, but will fit the ep3.
off hand, i remember HondaMan had tein basic on his ride.
Alright this may sound like a stupid question but I was looking at Teins website because i was interested in getting the Tein basic Damper coilover system. The website says that it is only for 03+. I wanna know if anyone who has an 02 have the Tein Basic Damper on thier car. the model number i am looking at is DSA22-LUSS2. Supposed to be for an EP3. Im pretty sure the 02-04 suspension set up is the same but i wanna make sure before i make my big purchase. so if anyone can give me any feedback that would be great. I emailed tein already but they havent got back to me.
they are all the same. from 02-04 ep3. how much u getting yours for?
part number DSA22-LUSS2 is also made for the 01+ civics, but will fit the ep3.
off hand, i remember HondaMan had tein basic on his ride.
Last edited by raiyo; 06-21-2004 at 03:26 PM.
well ive been looking around and the best price i can get for it is about 900 and change..... i dont really know of anywhere else where i can get it cheaper. i got a reply from Tein and they said i would need the 01+ civic top mount bearing... im not really sure wat that means..
If I recall correctly, you'll need the 01 top bearing is because..... without it, your car will just lower itself now and then. do a search, pretty sure it'll come up somewhere. it's been talked about.
yah, 9 bills is the cheapest i found too.
im gonna keep doing my research and stuff before i make any purchases...thanx alot man.
i never used the 01 bearing and my car hasnt lowered itself one bit.....
i got the basics and on the strut itself it says fot civic 01 + thats it, just used all my stock parts for the top mounts or whatever they are called. comes with everything your need. instructions are pretty good. got mine from showstoppers for 880 - thats the cheapest i got mine for. at the time. maybe yours will be the same or cheaper. i shopped around for the teins and showstoppers was the cheapest by far!!!
best i found was 890 something shipped. I guess if you don't live in Cali, Showstopper is your best place to shop for that item then.
Can't remember for sure, but a few members had problem with there Teins lowering themselfs.
evilsilrcivic.....which model are u using right now on ur car... because im not really sure wat u mean by saying u have the 01 civic tein basic on ur car... sorry maybe im misunderstanding it.
i was wondering the whats the point of having pillow ball mounts and if i decide to get the basic do i need them. and last thing is, is the basic damper coilover damper adustable.thanks
i have a 2003 EP //// Tein basic damper.
well when i spoke to Chuck from SS i asked for tein basic for the EP; when i got it , it has a little plate on each strut and on the instrution booklet that says the suspension is for a civic 01+ (and up); Im assuming it will also fit the civic coupe -- now it comes with 2 sets of rings one green and one orange/gold colored; wich goes ontop of the strut with everything else(i think i used the green donet remember); i think this is what makes a diff. when using the coilovers on either a coupe or the EP. Hope this helps a bit. when and if you get it how far do plan on lowering it?? mine is lowered all the way in the front (dont know how many inches) and raised an inch in the back- anyways before you put the strut back together just cut the dust cover cause if not it will fold in and make a loud annoying noise when you hit bumps or pull in somewhere slow or turn.
Last edited by EvilSlvRCiViC; 06-24-2004 at 06:51 AM.
Originally Posted by hksuperSi
dont know; and yes the are adjustable, but tien recommends having them at lowest setting for best performance.
Yes, the Tein Basics will fit the 2002 Si/EP. They are a great suspension system...I would not get the 01+ Civic setup...only get the EP3 setup.Originally Posted by raiyo
If you need any install advice when the time comes, feel free to drop me a line.
Ditto!Originally Posted by Az02Si
Get them from Chuck @ ShowStoppersUSA.com...that's where I got mine.Originally Posted by EvilSlvRCiViC
The EP3 Tein Basics do not work with the Tein Pillow Mounts and they are height adjustable only...no rebound or dampening adjustability. You will reuse some of your OEM parts and the suspension kit will have everything else you need. Also, you will want to trim about 1 inch off the rear shock dust covers or they will bottom out on the Tein shock assembly and make noises...also spray a little WD40 on the dust covers in this area. Dang, I should go into business install Tein Basics on EP3's! LOL ;)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks