progress tie bar combo vs. spoon lower tie bar

[hksuperSi]

i'm not sure what to get. with the progress it comes with tie bar and sway bar, will it be better or just a one piece from spoon. will both feel the same or will the progress be better because it comes with swaybar. help me please.

[raiyo]

if that's only my option, then I would go with the progress sway/tie combo.

[Civicvtec1ps]

Get Progress.

[toda_power]

yeah, i was thinking of switching my progress rear tie bar to a spoon one just for bling...

[johnkimble]

that spoon one bent on an coupe on honda-tech -- my opinion: spoon tie=garbage, get progress

[toda_power]

that spoon one bent on an coupe on honda-tech -- my opinion: spoon tie=garbage, get progress

yeah, i've seen that.

[STP03BlueSI]

The Progress will not work with the Spoon lower tie bar.

[EvilSlvRCiViC]

Get the Progress worth the money!

[fsugatorbait]

Your not going to notice a difference with just the lower tie bar, its to help suppliment the sway not really going to make a difference by itself.

[hksuperSi]

whoa it seems like everybody likes the progress so i guess i'm going with them. thanks everybody.

[trabadoo22]

Just be aware that the Progress bar will most likely rub against your exhaust. It is an easy fix with shorter rubber hangers though. If you have the money go with Comptech since they designed the bar to fit up to a 3" exhaust.

[specialblend154]

Just be aware that the Progress bar will most likely rub against your exhaust. It is an easy fix with shorter rubber hangers though. If you have the money go with Comptech since they designed the bar to fit up to a 3" exhaust.

yeah my exhaust rubs a little now with the stock sway. where did you get those hangars from? thanks

[hksuperSi]

isn't the comptech one pretty pricey. if people have the progress can u guys post pics of it with ur exhaust installed thanks.

[trabadoo22]

yeah my exhaust rubs a little now with the stock sway. where did you get those hangars from? thanks

I ended up going to a muffler shop. They didn't have any smaller rubber hangers on hand so they just fabricated the metal hangers on the exhaust so the exhaust hangs higher now. Both do the same thing so just do whichever one is easiest for you. If you just want some shorter rubber hangers then I would check around local muffler shops or parts stores. I know some other people on here have done this so maybe someone will be able to give you an exact part #.

isn't the comptech one pretty pricey. if people have the progress can u guys post pics of it with ur exhaust installed thanks.

Ya the comptech one is around $350. I have the Progress bar and can take some pics a little later and email them to you; I don't know how to post pics on here.

[hksuperSi]

cool thanks man for taking time to take pics and email them to me.