my fingertips basically came off after rubbing all the glue off.
it was worth it in the end though
my fingertips basically came off after rubbing all the glue off.
it was worth it in the end though
i used a heat gun, then some goo gone. washed clean and then waxed the area. worked perfect.
I used a heat gun to pull off the sticker, and then left the goo on for about a week. This made it much more difficult to remove.
I'm sure some are going to cringe at the thought, but I used brake cleaner and a super soft rag to get the adhesive off. I was real quick with the brake cleaner, and it evaporates fast, causing absolutely no damage to the clear coat.
Took 5 minutes with brake cleaner :)
I didn't have a hair dryer so I actually used my spot light.
mine was no problem at all..
GA heat = a hairdryer I guess
my stickers were horrible they would not come off they were old or something took a few hours and throbing fingers to get them off even with a heat gun they came apart in tiny peices.
Best thing i ever bought was a pin stripe removal tool!
It will take any adhesive or sticker off without disturbing the panel!!!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks