I don't have a garage to work in. And I have a gravel drive may. :'( It sucks ass!
Nice write up!
Tools needed:
-2 Jack stands
-10 mm socket
-17 mm socket
-tin metal cutter
-floor jack
1. Jack up car and place it on jack stands
2. Remove tire
3. Using 10 mm socket remove bracket holding ABS line. (see pic)
4. Remove 17 mm bold holding camber kit to brake assembly/rotor (see pic)
5. Remove the two remaning 17 mm bolts holding camber kit to frame of car. (see pics and notice blinging ratching and socket...hehehehe)
6. Adjust new camber kit to roughly the same size as OEM kit. It helps when putting new kit on. You can adjust after the car is back on the ground.
7. You'll notice when you put the bolt that screws into the brake assembly/rotor it has nothing to lock it in place. The OEM kit has threads on it. The new SPC comes with a brand new 17mm bolt that locks on the end.
(see pic)
8. When bolting back on the ABS bracket (10 mm socket) snip off the tab to give it a better fitment. (see pic)
9. Finished product...(see pic)
10. Gotta love a nice garage to work in.
Last edited by Zero Three Si; 07-02-2004 at 08:29 AM.
I don't have a garage to work in. And I have a gravel drive may. :'( It sucks ass!
Nice write up!
I'm a hike from you man...but if you need a place and tools....come on by. 60538
How long did it take you to do it?
nice diy, a friend and i did this last friday, very easy install, especially with air tools
just inspired me to do it myself.... great write up
Forgot something.
You need to take the two nuts and snug them up or your center adjuster will turn causing dammage to the ABS line and the cause some some camber problems.
good posting
moved to How To section
I did mine myself and had the car aligned and it drives great, No more tire wear!!!! I really recommend this to everyone.
Great write up. Excellent pictures and illustrations. I'll be doing this next week as I just got neuspeed race springs. Thanks! :] :D
very nicely done couldnt,look easier thanks to you!it helped tons
at how much drop should i install a camber kit? i was looking for a 1.5 drop
any drop you should consider a camber kit.
Glad I could help guys. Thanks for the positive feed back.Originally Posted by ep3nightkid
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks