Driveshaft axles: Any aftermarket available??

[chet]

Just like it asks, are there any aftermarket driveshaft axles available for the EP. I never guessed I would want to replace these. . .There's a possibility I bent the right one, I'll hopefully find out by Wednesday. So if you know of any, or any suggestions of companies to check out. . .This is definitely a new one for me. Thanks guys.

[siep]

TCI Auto has some listed for the earlier Honda/Acura models, but you might want to contact them to see if they'll be releasing a set for the EP:
http://www.tciauto.com/sport_compact.htm
Fidanza is supposed to come out with some as well, but it's not listed on their site, try contacting them too:
http://www.aluminumflywheels.com/contact.html

[chet]

TCI Auto has some listed for the earlier Honda/Acura models, but you might want to contact them to see if they'll be releasing a set for the EP:
http://www.tciauto.com/sport_compact.htm
Fidanza is supposed to come out with some as well, but it's not listed on their site, try contacting them too:
http://www.aluminumflywheels.com/contact.html

Thanks for the links, I'll check with them, let you know what I find.

[jon volk]

www.driveshaftshop.com

[chet]

www.driveshaftshop.com

Excellent find!! Do you know much about their quality? I will say, the price for a pair of the stage II's for the EP is lower than one oem. I thank you.

[detroitsi]

Their are excelent. I had them on my 300 whp ford contour for two years and still running strong. Go for them!!!

[chet]

Their are excelent. I had them on my 300 whp ford contour for two years and still running strong. Go for them!!!

Thanks for the info. . .I'll hopefully find out tomorrow if I will definitely need the right side (in which case I'll just order the pair from these guys), or it'll hopefully be a tie rod end, a lot cheaper.

[FCobra94]

Excellent find!! Do you know much about their quality?

A bunch of my B and H-series friends have been running these axles for a long time now on their all-motor and turbo 12 sec Civics/Integras and they have held up beautifully. Plus, I have heard nothing but good things about DSS from message boards all over :winkm:

[chet]

A bunch of my B and H-series friends have been running these axles for a long time now on their all-motor and turbo 12 sec Civics/Integras and they have held up beautifully. Plus, I have heard nothing but good things about DSS from message boards all over :winkm:

Thanks for the feedback, I hate to buy anything when I'm not sure of their product. I've made mistakes in the past like that. I'm glad to hear a quality company actually had the parts I was looking for.