here's mine I just did this weekend
4sur man thanks appreciate it
here's mine I just did this weekend
Smooth red looks really good too. Nice job.
i used vht wrinkle black and did mine(basically the same thing as the red). i put on 3 pretty decent coats and then baked it. i think i could have gotten slightly better results by going a little thicker on the coats but whatever. here's a pic
bump for this
might come in handy someday soon!!! :)
Hey guys,
Sooo I just did this over the weekend. I just put the valve cover back on my car and I turned on the car to check if everything is fine. When I turned the car on white smoke started coming out from the back left side of the engine. I'm not sure what it is. Any help?
Nice write up only thing i would of added is what you did to prep and get the valve cover so clean with? But i got my valve cover ready to do a bronco theme on it will post pics when finished if it comes out how i want it to. Blue and orange baby
i replaced the gasket and now i have no leaks. wooo and it looks lovely.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks