Close

Results 1 to 15 of 51

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Ep whaaa? Jpax's Avatar
    Join Date
    Sep 2002
    Location
    Edmonds, Washington, United States
    Posts
    4,108

    TUNERS CORNER - Place for you to learn from

    ok I JUST got these datalogs.

    Ok with out looking at the KAL (Map) file and just looking at the Data logs I want people to post what they SEE WRONG
    Attached Files Attached Files
    Last edited by Jpax; 04-19-2008 at 06:09 PM.

  2. #2
    Almost Not Slow... blackhatchsi's Avatar
    Join Date
    Apr 2008
    Location
    Texas
    Posts
    199
    I cannot open these files.?. I'm not a tuner anyway so I couldn't say what was wrong with the kals.

  3. #3
    Ep whaaa? Jpax's Avatar
    Join Date
    Sep 2002
    Location
    Edmonds, Washington, United States
    Posts
    4,108
    place to learn my friend place to learn.

    You can down load the program here

    and just install with Defaults.

  4. #4
    slow & quiet again 4angrybadgers's Avatar
    Join Date
    Dec 2006
    Location
    Hattiesburg, MS
    Posts
    1,189
    The A/F is all over the place. It gets way too lean for a lot of the datalogs, spiking up to 15.97:1 near redline in the second datalog. I assume that's the main reason for the retardedly insane knock count.

  5. #5
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    TPS is not zeroed
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  6. #6
    elitist jerk weltall's Avatar
    Join Date
    Feb 2004
    Location
    no where
    Posts
    3,641
    what motor is this?
    i once had a 592whp ep on pump gas, i sold it and bought a Z
    (heed my advice i know what im doing)

  7. #7
    Ep whaaa? Jpax's Avatar
    Join Date
    Sep 2002
    Location
    Edmonds, Washington, United States
    Posts
    4,108
    K24 - no boost - 6 speed tranny
    Great observations

    4angrybadgers - hit the nail on the head and there is something else allover the place too. look deeper, its what helps the AF work ;D

    Doug good Eye! TPS is not zeroed
    Last edited by Jpax; 04-20-2008 at 08:58 AM.

  8. #8
    elitist jerk weltall's Avatar
    Join Date
    Feb 2004
    Location
    no where
    Posts
    3,641
    it looks as if the vtec isnt properly tuned/working

    as soon as the car hit 5.6k the afcmd goes to 12-1 mean while the actual afr goes to 14-1
    i once had a 592whp ep on pump gas, i sold it and bought a Z
    (heed my advice i know what im doing)

  9. #9
    elitist jerk weltall's Avatar
    Join Date
    Feb 2004
    Location
    no where
    Posts
    3,641
    looking deeper

    o2 looks dead but im gonna change some values
    i once had a 592whp ep on pump gas, i sold it and bought a Z
    (heed my advice i know what im doing)

  10. #10
    Registered User robhep3's Avatar
    Join Date
    Apr 2008
    Location
    Plainfield, IL
    Posts
    312
    Looks to me like there was a few seconds of Sixth gear?

  11. #11
    Ep whaaa? Jpax's Avatar
    Join Date
    Sep 2002
    Location
    Edmonds, Washington, United States
    Posts
    4,108
    correct.

  12. #12
    elitist jerk weltall's Avatar
    Join Date
    Feb 2004
    Location
    no where
    Posts
    3,641
    what part is correct?

    i you originally said 5 speed
    i once had a 592whp ep on pump gas, i sold it and bought a Z
    (heed my advice i know what im doing)

  13. #13
    Ep whaaa? Jpax's Avatar
    Join Date
    Sep 2002
    Location
    Edmonds, Washington, United States
    Posts
    4,108
    Quote Originally Posted by weltall View Post
    what part is correct?

    i you originally said 5 speed
    yeah the owner said it was a 5 speed but kpro says 6th speed, unless they threw it in reverse while furll throttle then I would go with K pro s readings lol

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •