Close

Results 1 to 13 of 13
  1. #1
    ephatch member shenmuep3's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    87

    Some one needs to post the Ridgeline Key Transplant diy

    Guys we need the Ridgeline Key transplant diy again, namely I need the part number for the key just to make sure it is compatible with the ep, thanks guys lets build this site back up!!!

  2. #2
    Registered User
    Join Date
    Apr 2008
    Location
    Houston
    Posts
    233
    I searched googles cache and couldn't find the diy unfortunately. But I think if you ask for an 06 ridgeline key there should only be one that comes up. Cost me $45 from the dealership I think. As long as the FCC ID is the same it should work fine.

    The FCCID on mine is: QUCG8D-380H-A although those letters are tiny so I may be off.
    And the IC: 850G-G8D380HA .

  3. #3
    ephatch member shenmuep3's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    87
    Thanks man, I will have to check this out at the dealer!!!

  4. #4
    Ep whaaa? Jpax's Avatar
    Join Date
    Sep 2002
    Location
    Edmonds, Washington, United States
    Posts
    4,108
    moved to how to section. this is not a DIY: this is a request for one.

  5. #5
    ephatch member shenmuep3's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    87
    Word, thanks jpax!

  6. #6
    ephatch member shenmuep3's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    87
    What is the part number for the ridgeline key that is compatible with our car?

  7. #7
    ephatch member shenmuep3's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    87
    Bump...Anyone???

  8. #8
    Registered User
    Join Date
    Apr 2008
    Location
    Los Angeles
    Posts
    116
    Damn I need this. I wonder if anyone has pics on how to transplant your key to the ridgeline key.

  9. #9
    Registered User
    Join Date
    Aug 2008
    Location
    Bellevue Nebraska
    Posts
    2
    the actual part number is 35111-SHJ-305

  10. #10
    Registered User
    Join Date
    Apr 2008
    Location
    Lyons
    Posts
    16
    If you do a search for switchblade key you will find a few posts that will give you the general idea of what needs to be done to your stock key to get to the immobilizer. You can use either Ridgeline or Accord keys for this mod. I used an accord key and the most complicated part was driving to the dealer to get my key cut, they do this for free you know.
    First things first, once you have your key, make sure you can program it to your car by following this series of steps:
    Programming your keyless entry: Insert your current key into the ignition and turn ignition to on position; within 4 seconds press the lock button on your remote. Do this a total of four times. On the fourth cycle you will hear your door locks click; press the lock button on all remotes you would like programmed to your car.
    Once you have established you bought the correct key and it will unlock/lock your doors, go get the key cut.
    After the key is cut break out your Kleins and cut the plastic head off your car key to get to the immobilizer chip.
    Search for pictures

  11. #11
    ephatch member rspjean's Avatar
    Join Date
    Jun 2008
    Location
    Kissimmee, FL
    Posts
    107
    is this ridgeline key a switchblade

  12. #12
    ephatch member RHCP0801's Avatar
    Join Date
    Apr 2008
    Location
    NY
    Posts
    2,295
    no, they are not

  13. #13
    ephatch member rspjean's Avatar
    Join Date
    Jun 2008
    Location
    Kissimmee, FL
    Posts
    107
    oh ok thanks man so its only the acura keys that are switch blade?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •