DIY: K24a1 swap

[EPSU3]

the 310 cc injectors come from the k20a2, as for question one, good question.

[davisj3537]

Couple of stupid Q's:

1. Is the K24A2 oil pump the same as the K20A2?
2. So the 310cc Injectors used with the K20A3 ECU keep the K24 from running too lean? Which motors can the 310cc injectors come from?

Thanks

Sorry I haven't seen this thread in a while. The k24a2 pump is not the same. Those injectors only come from the k20a2 and the k2a2. Also there is no coolant port on the head to block off or reroute.

[davisj3537]

thanks.
let me know wat size belt when u get a chance.

I ran a 685k6 on the last swap I did and it works just fine even though it is only a 6 rib belt. If you can find one then you would want a 685k7 but like I said the k6 works just fine.