Do I need to do anything to regulate fuel pressure? Or just drop this in and thats it?
Good info bro !!! man i did mine and danm it was a bitch. i wish i wouldve saw this thread.
Do I need to do anything to regulate fuel pressure? Or just drop this in and thats it?
Last edited by jimmyjames; 02-18-2011 at 04:52 AM.
How to properly use Apostrophes
The rev limiter is not meant to be used as a shift light
Thanks, great DIY. I take it that the wiring is pretty straight forward since you didn't mention it, Black to black and red to red?
the 3/8 hose number is H206
Im glad the made this cause I might replace my pump soon
How to properly use Apostrophes
The rev limiter is not meant to be used as a shift light
Is that new fuel line you add the important part? does it flow more than the stock lines or something?
THE1986 - 2002 HFP TW EP3
"None of you seem to understand. I'm not locked in here with you, your locked in here with ME!
THE1986 - 2002 HFP TW EP3
"None of you seem to understand. I'm not locked in here with you, your locked in here with ME!
Just did this DIY, great write up. With these instructions I did it start to finish in about an hour. The reason you need to cut off that piece and use the hose is because the new pump doesnt have the same fitting as the stock pump and it is alot longer so even if it did fit the quick release fitting they don't really line up. Thanks again for the write up
I used a big flat head screw driver and a hammer to tap the ring loose and then I could just loosen it by hand.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks