There have been several instances of the ghetto catch can mod.
All of these require mounting inline between the PCV and IM with hose clamps.
---------------------
Ver. 1
Fram fuel filter
Part # G2 is 5/16” and G3 is 3/8”
Cost: $3
Available from: Auto Parts store
The unfortunate problem with this fuel filter is that it has to be mounted horizontally to be effective thus limiting its effective life of catching enough of the blowby gases.
---------------------
Ver. 2
Purolator fuel filter
Part # F40163
Cost: $3
Available from: Auto Parts store
This filter solves the horizontal mount issue and does a fair job but the input and output lines are only 5/16". I have not had a significant problem though.
Below is my setup.
---------------------
Ver. 3
Husky Air compressor filter
Part # HDA70400AV
Cost: $12 (plus fittings)
Available from: Home Depot
A very detailed write-up is here:
http://www.pbase.com/rsrock/oil_catch_can
Bookmarks