bump! anyone? Please!!!
nice diy, this would look nice in the dash
ok, looking at the back of the button, starting from the right, you have your 12v output that you wire to pin 85 on your relay. next is your 12v ignition, which you wire to pin 87 on your relay, then wire pin 87 to the black/yellow wire on the brown plug on your steering column. the third wire is your ground, wire that to pin 86 on your relay, and then wire pin 86 to a ground source (I used the bolt by the footrest). Finally wire pin 30 to the black/white wire on the brown plug (this is your starter wire).
I just tapped the wires, so I can still use my key to start the car.
lemme know if it's not clear.
uhmmm that link on how to take out your dash doesn't work ...
jh604 you get the start button working?
Pics? Also what nitroboarder posted did it work? Im thinking about getting one and doing it soon... did you mount it where the hazard light was?
great write up man. I was actually talking to a buddy the other day about doing this exact same thing.
i finally did mine last weekend.....i tried doin it the EP hatch way n it kept blowin' my fuses for some reason.....so i went on CRSX n i just used a Relay. Im not sayin' don't do it this way.....but just to be on the safe side get urself a Relay.....cus if n e thin' happens u'll blow that relay 1st n not any other car part.
i got my relay from Pep Bois......n it was only 4bucks!!!
(Car Stereo aile)
sweet thx, i been wanting to do this for awhile but im clueless.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks