DIY: Cluster Removal

[Psykoasn]

Tool: all you need is a small Philips screw driver

First, if you have a removable steering wheel remove it, if not tilt your wheel all the way down


Start off by gently pulling the top part of the black cluster trim



Then work your way to the bottom corners



Now remove the 3 screws with the Philips screw driver, one at the top middle and 2 at the bottom sides







Now pull the whole cluster forward a little and tilt I forward



And remove the 2 male plugs at the top



And your done

Here is the back the bulbs



Enjoy

[thisisagame24]

nice right up mang

will be helpfull to any one that wants to get rid of the flashing green key light haha

[shadowmd]

umm my damn center light in my cluster just went out..so after 6k and up to 50mph i can't see at night lol so now i gotta do this lol.....and another solution for those who have kpro and that flashy green light, you could also just pull the steering colum cover off and unplug the immob.

[humpmasterflex]

umm my damn center light in my cluster just went out..so after 6k and up to 50mph i can't see at night lol so now i gotta do this lol.....and another solution for those who have kpro and that flashy green light, you could also just pull the steering colum cover off and unplug the immob.

I have the same problem... and so do 2 people that I know of, and What I usually do is smack the top of the cluster and it comes back on.

Now I don't have to smack it anymore it just lights up normally.

[EPandaman29]

nice write up! i actually need to change a bulb maybe cuz half of my speedometer is not as bright

Anybody else have this problem???

[jeenyusss]

oh sweet, goodbye green key

[Psykoasn]

nice right up mang

will be helpfull to any one that wants to get rid of the flashing green key light haha

LOL,

also apparently there is no bulb for the SRS light

[cHaRL!e]

LOL,

also apparently there is no bulb for the SRS light

the SRS light isn't a light that's easily replaceable like the ones he listed. it's actually soldered onto the board.. so if you want or need to replace it, you would have to take apart your cluster, desolder or cut the led, and solder a new led back on.

btw i believe cruise control is where you labeled "extra light"

[az-epdrvr]

great fyi

[RJEP]

I need to do this. I have a light bulb on the left corner that sometimes goes out. I have to smack my dash for it to go on.

Great DIY

[Psykoasn]

the SRS light isn't a light that's easily replaceable like the ones he listed. it's actually soldered onto the board.. so if you want or need to replace it, you would have to take apart your cluster, desolder or cut the led, and solder a new led back on.

btw i believe cruise control is where you labeled "extra light"

i think your right on that one, i don't have cruse control any more so i couldn't think what it was for i will fix the label

[PuMpKiN_Ep3]

nice... i'll go get the JDM Type R one... now..

[bluedemonep3]

Super easy tool me 5 mins. And most of that was trying to take out the bulb from its socket lol

[ep32424]

great i might get the JDM TYPE R soon.

[Danielsle]

so im ganna remove it soon jus wondering . . . .

i want to make the light bright wat am i looking at ??

any modifications ?? or just different bulb ??

sorry for the dumb question .

Not sure I understand what you mean. You want to make the cluster brighter? Just turn the brightness knob. If not that, then replace the bulbs.