DIY: Cluster Removal

[robhep3]

On a related note, does anyone have the different color rear illumination DIY? The one to make the orange backlighting blue or whatever?

[Danman281]

nice write up! Now we can change it to red if we want lol

anyone have any pics of their dash mods?

[72chevel]

great thanks I am going to take mine out tommorow!

[cHaRL!e]

On a related note, does anyone have the different color rear illumination DIY? The one to make the orange backlighting blue or whatever?

http://www.civicforums.com/forums/7-...auge-swap.html

pics are not working

http://forums.clubrsx.com/showthread.php?t=102079

http://www.k-series.com/tech_detail...._CON_LITE_SWAP

there it is, from the king of light

I did this last summer and ended up messing up my gas gauge so it doesnt move at all.. and my speedo is off by about 4 mph.. and my lights have hot spots. On the bright side my cel isnt lit up

If you plan on doing this, make sure you get lots of practice on soldering (if you're a noob) and an extra pair of hands always helps. Put everything back CAREFULLY!!

Luckily i have a ukdm cluster waiting to go in

[robhep3]

DUDE! Thanks, Charlie!

[rd02SiR]

Is there a bulb for the abs light?

[Emjay]

I can't tell if you can get at anything other than the bulbs. My Odometer reset button doesn't work.

Does anyone know if I can get at the switch that the reset button pushes against? Or do I need to replace the cluster?

[Psykoasn]

I can't tell if you can get at anything other than the bulbs. My Odometer reset button doesn't work.

Does anyone know if I can get at the switch that the reset button pushes against? Or do I need to replace the cluster?

You will most likely have to take the whole thing apart to get too it, you won't be able to get to it from the back

[andre_ep3]

my ep came with a cheap ebay adjustable glow cluster and when i took it off i messed up my mph needle, now it doesnt even work, any way to fix this?

[kingpuba]

which bulbs are those for the backlight?

are they all t5 bulbs? can they be replaced with LED resistor wedge bulbs?

kp

[smykhaisouk]

thread bump. i also need to know the size of these bulbs because my fuel and temp lights on the instrument went out this morning. i searched forum and found this thread. thanks ephatch.commmmmm

[username011]

just to let you guys know,

this thread is 2 years old.

[kingpuba]

you can get t5 twist lock leds on ebay for about 50cents each...

the panel itself has orange fil which makes it orange and nail polish remover takes it off quite easily..or a high grit sand paper..which ever you prefer..

needles come off but need some force as stated in some of the links above...

best solution would be to buy bulb replacements and use the oem holders for the bulbs...ie buy leds that fit into the holders off ebay..they're dirt cheap...

kp

[Passenger]

just to let you guys know,

this thread is 2 years old.

???

[usedep3]

???

+1

just to let you guys know,

this thread is 2 years old.

who cares if it's 2 years old. i;d rather these people post up their questions here where it's relavent than the EP discussion forum that everyone seems to be posting in now a days