Would a stock RSX-S header and cat mounted on a K24 clear an EM2 from sway bar?
Would a stock RSX-S header and cat mounted on a K24 clear an EM2 from sway bar?
Is the waterpump the same from the k20a3 -> k24a1?
yeah that ^^. I'm currently using a k24a1 waterpump on my k20a3 motor... it's a pain in the A$$ to change it.
My k24a1 came in today and the crank pulley has about half of the outter lip chipped off. Is this going to be a problem and if so can I just swap the a3 over to it?
No difference at all with the ESMM inserts, they have the same exact durometer rating. Yes the black inserts have Graphite in the urethane matrix, but it does not make them stiffer, only better for suspension bushings that see movement, so motor mounts will see nothing.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks