Close

Page 1 of 3 123 LastLast
Results 1 to 15 of 51

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    EPhatcher since 04' SiR R8TD's Avatar
    Join Date
    Apr 2008
    Location
    Toronto, ON
    Posts
    470

    DIY: SRS light reset

    Here are some simple instructions on how to turn off the SRS light. The SRS light will stay on if you have the key in the "run" or "on" position & remove the wire under the seat or mess w/ any of the SRS components. When the light is on, there is a problem w/ one or more of the SRS components & the system is disabled. If after these instructions the light still comes on, have your vehicle checked immediately @ your local dealer. You may need to do this more than once, be patient, it's not very hard. Remember, your dealership will charge you to turn off the SRS light

    ***This works on all 02-05 EP3 & 01-05 ES1/EM. May work on other generations of Civic's & Acura's also.***
    Here we go:

    Here is the under dash panel, located directly under the steering column. Remove it.


    This is the under dash fuse panel. It's just to the right of the steering shaft behind the center console.


    Here is the YELLOW SRS service connector located on the fuse panel.


    Unplug the YELLOW SRS service connector.


    All you need is a paper clip, bend it in 1/2 & insert it into the YELLOW SRS service connector(not the actual fuse panel).

    1- W/ the igniton switch "off", insert the paper clip ito the connector

    2- Turn the ignition switch to the "ON" position.

    3- The SRS light will come on for 6sec & then turn off. Remove the paperclip w/in 4sec of the SRS light turning off.

    4- The SRS light will turn on again. Re-connect the paperclip w/in 4sec of the SRS light turning on.

    5- The SRS light will turn off. Remove the paperclip w/in 4sec.

    6- The SRS light indicates that the memory is erased by blinking twice.

    7- Turn the ignition switch to the "OFF" position, wait for 10-seconds & it's done.

    ***Be sure to put the service connector back on the fuse panel, don't just leave it hanging***
    Last edited by SiR R8TD; 04-13-2009 at 08:56 PM. Reason: formatted thread title

  2. #2
    Registered User hxctuner's Avatar
    Join Date
    Apr 2008
    Location
    carmel mtn/SD
    Posts
    10
    kool i need this! nice write up

  3. #3
    ephatch member
    Join Date
    Apr 2008
    Location
    NORCAL
    Posts
    154
    i need to reset mine. ever since I removed my passenger seat for track, I never reseted the SRS. that was almost a year and a half ago. thanks for the write up. will do tomorrow with the MTF replacement I have planned.

  4. #4
    無限SKOOGEN skoo74's Avatar
    Join Date
    Jun 2004
    Location
    Lot 52, Thailand Refugee Camp
    Posts
    359
    nice! used this writeup a few times before ephatch had the earthquake..

    btw, there's another yellow plug under the dash on the "left side"... don't use that one.. (i was confused and tried to reset that one for like 30 mins til i realized it was the wrong one... duh! lol)

  5. #5
    EPhatcher since 04' SiR R8TD's Avatar
    Join Date
    Apr 2008
    Location
    Toronto, ON
    Posts
    470
    Quote Originally Posted by skoo74 View Post
    nice! used this writeup a few times before ephatch had the earthquake..

    btw, there's another yellow plug under the dash on the "left side"... don't use that one.. (i was confused and tried to reset that one for like 30 mins til i realized it was the wrong one... duh! lol)
    Yeah the SRS one has a wire coming out of it. Looks like a phone line almost.

  6. #6
    Registered User NyQuil's Avatar
    Join Date
    Apr 2008
    Location
    Virginia is for Lovers
    Posts
    433
    6-All you need is a paper clip, bend it in 1/2 & insert it into the YELLOW SRS service connector(not the actual fuse panel).


    by that do you mean the yellow connector when it's hanging free or the box it was plugged into? I'm confused on that one.

  7. #7
    Registered User 03silverEP's Avatar
    Join Date
    Aug 2003
    Location
    midwest
    Posts
    772
    Quote Originally Posted by RJEP View Post
    i need to reset mine. ever since I removed my passenger seat for track
    same here, thanks for the info guys!!!!!!!!!! (one more light off 2 to go.)

  8. #8
    Über Geek
    Join Date
    Apr 2008
    Location
    ATL
    Posts
    229
    This worked just great, but unfortunately my srs unit was bad, so the stealership replaced it. They covered the cost of it though. They thought they damaged it when they did my body work on the car.

  9. #9
    Not A Μoderator xachary82's Avatar
    Join Date
    Apr 2008
    Location
    276
    Posts
    360
    finaaaaaally I dont have to drive at night with a bright red glow coming from my gauges!!! thank you so much

  10. #10
    03 VBP K24 W/6SPD az-epdrvr's Avatar
    Join Date
    Apr 2008
    Location
    arizona
    Posts
    309
    whats wrong if light comes back on , after doing all this ?

  11. #11
    EPhatcher since 04' SiR R8TD's Avatar
    Join Date
    Apr 2008
    Location
    Toronto, ON
    Posts
    470
    Quote Originally Posted by az-epdrvr View Post
    whats wrong if light comes back on , after doing all this ?
    You have an SRS problem. I you get a scan tool, you can pull SRS codes I believe.

  12. #12
    WRX Cobb Stage 1 Unknownally's Avatar
    Join Date
    Apr 2008
    Location
    NorCal
    Posts
    921
    My light is still on. Step 7 says to put it on "OFF." I put it on "I." The ignition is still off, right?

    How much will the stealership charge?

  13. #13
    EPhatcher since 04' SiR R8TD's Avatar
    Join Date
    Apr 2008
    Location
    Toronto, ON
    Posts
    470
    Quote Originally Posted by Unknownally View Post
    My light is still on. Step 7 says to put it on "OFF." I put it on "I." The ignition is still off, right?

    How much will the stealership charge?
    Turn the key to the position you would normally turn the car off w/. The stealership will charge you enough to make it worth their while.

  14. #14
    Registered User
    Join Date
    Jan 2011
    Location
    SoCal
    Posts
    95
    Awesome guy! worked for me! thanks!

  15. #15
    Registered User
    Join Date
    May 2011
    Location
    san diego
    Posts
    87
    this is once again awesome tried it and it works thanks guys

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •