Good place to start:
http://hondata.com/techk-protraining.html
Watch, take notes then go out to a open road and have fun!
mods:
kpro, hondata airbox mod, esmm, rsx s dc rh, rsx s midpipe, stock axel back
i was reading on hondatas forum that when they created the hi-octane kal that it was on a stock a3..and hondata said that by adding a rh the car would run lean..how do i correct this? adding more fuel? and what is optimal a:f ratio?
Good place to start:
http://hondata.com/techk-protraining.html
Watch, take notes then go out to a open road and have fun!
how do u know u r running lean? what i mean is what dose it say on ur laptop when u plug it in and put it in realtime.
you can correct lean issuse by adding fuel, you will need to datalog before you do. then find out where you need to add fuel
excellent thank you gents very much, going to be installing some parts next weekend or so...so i will get a datalog at that time and post it up for some insight
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks