I used the same 62.2" belt when I swapped blower/idler pulleys, and still have 1/4" left on the tensioner bolt... How old is your belt? It might be stretched out a fair amount.
there used to be a thread for belt sizes..but now obviously its gone. i just slapped on a '622' size belt for my old 4.0 pulley. but now i just installed a 3.8 sc pulley and a 2.5 idler pulley, i tried to tighten it up n i came to a point that the idler touches the compressor pulley already (took off the guard bolt). burned a lil bit of rubber..hehe! so yeah, i had to loosen it just enuf to hav a lil clearance. n now, i get those nasty belt squeaks again. anybody knows the size for a 3.8 sc / 2.5 idler set up? thanks in advance
I used the same 62.2" belt when I swapped blower/idler pulleys, and still have 1/4" left on the tensioner bolt... How old is your belt? It might be stretched out a fair amount.
street kit is a 63 inch belt, the race kit is a 62.2 inch belt......do not get dayton, the look like gatorbacks but slip like grease.
I have no ibea what the belt is for the 3.8 pulley.....just run some string and mesure it....a guess would be 62 inch....but who knows...
Yeah dayco belts are the brand you want to steer clear of. I was under the impression that along with the 2.5" idler pulley from the RSX, you will be able to run the 3.8" pulley and the 62.2" belt.
Here is the part# for the 7 rib 62.2" gatorback 4070622. This is the metric part # listed 7PK1580 (not sure what that means though, hahah)
Last edited by jerseyjew; 04-28-2008 at 05:15 PM.
thanks, that's d one i got. 2.5" rsx pulley, 3.8" pulley boys pulley, n 4070622 gatorback. yeah, i came to a point that the idler/compressor pulley were touching. when i loosened it a bit, i can feel the tension was not enuf when i press it with my fingers. i just thought there was something shorter than the 4070622 belt.
Goodyear does make shorter belts. The last 3 digits in the part number are the belt length - 4070622 is a 62.2" belt. If you can figure out what size you need, look for a belt part # with the closest last 3 digits.
Well the only problem is that you will not find a 7 rib belt anywhere near the size you need. The next size smaller for the 7 rib is like 55 inches. If you want you can grab a 6 rib belt, which should work fine, there is a lot larger selection in lengths with the 6 rib. Just google goodyear gatorback.
thanks guys! i'll see what i can do. it shouldnt be such a big issue. it's just so annoying i hear screeching everytime i move from a stop. i feel like somebody's always out there, the guy next to me, yelling at me saying, "FIX N TIGHTEN YOUR DAMN BELT!!!" makes me feel like i'm delinquent n don't take care of my car
Damn, you're right. That sucks...
http://www.goodyearep.com/ProductsDetail.aspx?id=3128 has all the belt sizes listed.
thanks you very much, guys!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks