if you are requesting Mustclime, you might as well step over to clubep3 for a faster response.
So, this friday im putting on my Teins and eventually the car is going to be lowered on 17X7 probably with a 17/15/215 or 225. Anybody with similar want to throw up their alignment specs that they used so I know what to tell the shop thats doing my alignment after I get done with the install.
if you are requesting Mustclime, you might as well step over to clubep3 for a faster response.
Camber -1.5 Front and Rear
Front - 1/32 Toe Out
Rear - 1/32 Toe In
HFP Shocks/Springs
27mm Progerss Front Sway
24mm Progress Rear Sway
Slight oversteer at the limit depending on tire pressures.
06 dc5 on progress coilovers, progress sways, rear bar set stiff.
front: 1.5 deg camber, zero toe.
rear: .75 deg. camber, 1/32 toe in.
225/45/17 yoko s-drives on 17x7.5 rim.
slight oversteer at the limit. I keep thinking I'll toe in the front a bit. Turns in very quickly, but it's a little nervous on a straight road.
The original thread got nuked. but someone saved the text..
http://ephatch.com/forum/showpost.ph...49&postcount=6
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks