04+ jdm ctr headlights... straight plug and play?

[88crx]

Trying to search just to confirm that the jdm ctr lights are a direct plug and play in an 04 ep3.

Do they need new sockets or anything?

Thanks guys.

[stealth]

I believe you will need a socket/connector from a newer prelude that will allow you to go from the 9005 or 9006(whichever is the low beam) --> h1. I think for the 04-05 si the other sockets are fine. In the 02-03 you had to change the signal light socket as well.

[SiN05]

think the JDM ones are beamed for rhd as well and u need to do some modifcation for lhd or else it seems u high beam everyone

[stealth]

think the JDM ones are beamed for rhd as well and u need to do some modifcation for lhd or else it seems u high beam everyone

This is true but not as noticeable with the projectors as with the halogens. But as far as wiring goes I think the one connector and you are set.

[88crx]

Yea I'm not really concerned with the beam pattern.

Can anyone confirm the socket required?? Thanks

[stealth]

95% positive its from the last gen prelude. The socket will plug into your low beam and allow you to plug the h1 into it.

[88crx]

Sorry, so its a inline socket/connection?

Stock low beam connected to the prelude socket (is it pluged?) to the H1 bulb?

I really wish the search worked lol.

[88crx]

So would one of these do the trick?

H1 to 9006 'conversion adaptor' from SUV lights? I need the "female H1 to male 9006" i think.

http://www.suvlights.com/product_inf...roducts_id=232

[jaeguyoon]

JDM is right hand drive beamed so not safe for US roads. HOWEVER, the projector headlights from germany are LHD so perfect for us! That's what I have.

[88crx]

JDM is right hand drive beamed so not safe for US roads. HOWEVER, the projector headlights from germany are LHD so perfect for us! That's what I have.

Look... I appreciate your help. But like I said

"Yea I'm not really concerned with the beam pattern."

I just need to get the damn bulbs figured out. thanks.

[spleensSi]

speed star has lhd lights with all the sockets and everything. check it out maybe that will help you out. i didn't know the type r lights low beam was not a 9006 good thing i didn't order those HIDs yet.

[88crx]

I have already ordered RHD CTR projector headlights.... done deal.... they're paid for. Now all I need is the damn bulbs/sockets to be ready for when they get here.

Edit: The JDM highbeams are 9006's correct?

[88crx]

anyone out there..................... help?

[paulmofyourhand]

yes you will need that 9006 to H1 converter. as the latest gen prelude h1 holder.

jdm high beam is still 9005.

that's ok ur cutoff is wrong, ur in canada :p

[88crx]

yes you will need that 9006 to H1 converter. as the latest gen prelude h1 holder. Or are people ghettoish cutting their harness?

Is that what everyone typically runs? SUV lights convertor?

jdm high beam is still 9005.

Ok, cool, thanks.

that's ok ur cutoff is wrong, ur in canada :p

Exactly... lol