04+ jdm ctr headlights... straight plug and play?

[d-unit]

Soooo no 9006 harness connector just a straight h1 thats interesting... hopefully the set i ordered comes with the 9006 = h1 jumper

i dunno man

i just went off what i was told to order, and im hoping this will do the trick, now im worried

[OPTIMISE]

Thanks Optimise!!!

Thats awesome. No I don't have the lights yet, they'll be here end of the weekish.

Thats exactly what I needed to know... I didn't realise I could use an H4 harness/plug. Did you cut the 9006 plus off your stock harness to wire it in or were you able to find a male 9006 plug?

One other thing, the prelude part #2 bridges between the bulb and the new H4 plug, it also holds the bulb in place in the headlight correct?

Thanks again dude!

Im not too sure what you are asking partially here, but yes I believe it was an H4 connector harness that I used [the female harness connector I posted in the pic]. you do not need a male socket 9006, the part number two is what the actual H1 bulb plugs into and then becomes the male portion of the 'plug-in-process'. then number 2 goes into the back of the projector and is held in place with this fucking wire [I hate it if you cant tell] that hooks into the top portion of the projector itself. you will see what Im talkin about when you get them, you have to completely remove the headlight when changing out a bulb...

[rolldic]

call showstoppers, i got mine there and they gave me the socket, you just need to convert the low beam

[88crx]

Yup, just got mine now.

I'll snap some pics in a minute.... and yes they came with the sockets & plugs. All I need to do is convert the 9006-H1.

I'll do up a nice DIY once I get the 9006 Harness.... its suppose to be here Monday.

[88crx]

Here's what you get when you order JDM CTR projectors from ShowstoppersUSA.

- 2 headlights (obviously)
- 2 H1 sockets
- 2 low beam rubber gaskets
- 2 high beam rubber gaskets

The pictures show the honda part numbers, maybe someone can confirm if they're a usdm part as well or if they do indeed match the prelude plugs & gaskets.

[wh03lse]

^ wow those look slick... any plans on a protector for those bad boys haha?

[CivicS]

I Have The Oem Kit If You Interested........tks

[OPTIMISE]

hmmm High beam gasket? I dont remember that... mine dont leak or anything though... you will hate that little metal clip that hold the H1 socket to the back of the headlight, so hard to clip back without the headlight off of the car...

[88crx]

you will hate that little metal clip that hold the H1 socket to the back of the headlight, so hard to clip back without the headlight off of the car...

Yea I was having a tough time with it even off the car.... you really gotta jam that bitch in there to get it to hook on.

I'm putting in all new bulbs so I won't have to change anything anytime soon.

[88crx]

Where does the H1 bulb ground to?

[jjermzz]

q's on this picture. Anmd what the harness for its only two spades ont the socket.

[d-unit]

q's on this picture. Anmd what the harness for its only two spades ont the socket.

1) Highbeams
2) H1 Fits
3) turn signals

[ash281]

putting these headlights on makes night/day difference for the whole appearance of the ep3

[jjermzz]

thanks

[vividk20]

Can anyone provide all part numbers necessary to make this conversion work.

So far I've gathered the numbers for the sockets and gaskets, what's the actual part number of the headlight and the conversion harness? Thanks for the help