Close

Results 1 to 5 of 5
  1. #1
    R.I.P VBP EP 2/13/09
    Join Date
    Apr 2008
    Location
    Cincinnati, Ohio
    Posts
    207

    Progress rear sway bar/tie bar combo clearance with the Greddy Ti-C?

    I will be putting on the Greddy Ti-C system and further down the line will be getting the Progress rear sway bar/tie bar combo and was wondering if the fitment is ok between the two or will bumping and/or any other noises coming from the Progress bar bumping the Greddy Ti-C happen? Are there any other sway bars and tie bars I could look into that woulnt interfere with the Greddy TiC. I'm trying to keep the budget under for a new rear sway bar and tie bar... and I thought the Progress set-up was a great deal. Thanks!!

    Matt

  2. #2
    OEM k24/20 224whp 02nhbpep3's Avatar
    Join Date
    Apr 2008
    Location
    Port City
    Posts
    392
    You will probably rub from what I hear about the progress rear sway but I would like to know also. I have the HKS hi-power and I'm proally gonna get the progress sway also and wrap the part that hits the exhaust with some header wrap to keep it from making noises.

  3. #3
    bit by the mod bug.. ohdamngetit's Avatar
    Join Date
    Apr 2008
    Location
    Lowell, Mass
    Posts
    332
    gotta agree, the progress rear sway bar w/tie is a great deal. I just picked it up and will be installing this weekend. I have a stock muffler so I dont know if I can help with the rubbing/knocking from the bar to muffler but I'll make an update here anyways. I'm also installing Tokico D's, Progress Sport Springs, Eibach camber kit and Omni LCA's. We'll see how it goes..... cant wait!!!

  4. #4
    GPP paid my bills! renovator's Avatar
    Join Date
    Apr 2008
    Location
    new jersey!
    Posts
    129
    since the Ti-C has 60mm diameter piping, there shouldn't be any problem. but i have the EVO TT and that's 70mm, i'm worried about clearance issues as well. i remember the challenge car had a custom 3-inch piping and had a notch built in so that the bar could clear. if the weather's good this weekend, i'll give it another shot at trying to install it again. (one of the end-links is seized on my stock bar)

  5. #5
    bit by the mod bug.. ohdamngetit's Avatar
    Join Date
    Apr 2008
    Location
    Lowell, Mass
    Posts
    332
    so I got it all together and guess what? I have a clearance issue. The sway bar is rubbing against the back of the muffler.... oh and on top of that, my rear driver side end link broke. o_0 damn, so just a heads up to whom ever is gonna do this mod, get some aftermarket end links to go with the package. Everything else went and fitted fine. The ride is great is great IMO, all that is needed now is an alignment.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •