Close

Page 7 of 7 FirstFirst ... 567
Results 91 to 98 of 98
  1. #91
    Registered User maksym's Avatar
    Join Date
    Jan 2009
    Location
    Chicago
    Posts
    192
    Quote Originally Posted by Ba82Ep3 View Post
    Im posting up a basic k20a3 I/RH/E HiOc basemap i put together with some WOT street tuning and some partial throttle tuning including ignition advance on the 10, 20, 30 degree maps.

    Its the most commonly asked for basemap and it should do you well for quite a while.

    *lo cam not tuned, all hi cam... 2krpm and up. Rev limit 7300rpm. No fuel economy (highway) tuning. Check immobilizer if needed.*

    Attachment 5759

    Back from the dead... Would this map work on Ver 4 Kpro and K24a1 with I/H/E swap? Enough fuel or higher fuel % adjustments needed? Would really appreciate the input. Heard people saying that some maps completed on the older versions of Kpro would not work on Ver 4. Just trying to make sure.

  2. #92
    Registered User
    Join Date
    Jun 2016
    Location
    Maryland
    Posts
    1
    Iam looking for a base map for a 2006 k24a2 swap with rbc mani types throttle body types oil pump types 45 deggree cam gear with hytech headers 2.5 catback catless please if any body has a good tune for this ep3 also it has ep trans stock fuel pump and 310 injectors plzz help a ep3 out thanks guys

  3. #93
    Registered User
    Join Date
    Aug 2016
    Location
    Jax FL
    Posts
    1
    Quote Originally Posted by Elmotero View Post
    Iam looking for a base map for a 2006 k24a2 swap with rbc mani types throttle body types oil pump types 45 deggree cam gear with hytech headers 2.5 catback catless please if any body has a good tune for this ep3 also it has ep trans stock fuel pump and 310 injectors plzz help a ep3 out thanks guys
    Looking for the same, any help would be appreciated.

  4. #94
    Moderator=>PM 4 Help MugenReplica's Avatar
    Join Date
    Aug 2004
    Location
    Good question...
    Posts
    2,424
    Let me look for what I've found over the last couple of years. I think I have a Jeff Evans .kal for a K24/K20a2 combo.

  5. #95
    0EM xEcuTi0n Ba82Ep3's Avatar
    Join Date
    Feb 2006
    Location
    Mobile, AL
    Posts
    2,251
    Even so it will still only be a basemap. It will need to be tuned to be the best it can be.

    *scratch that just noticed the date*

  6. #96
    Registered User
    Join Date
    Feb 2021
    Location
    Kansas
    Posts
    1
    does anyone have a map for
    k24a2 04 tsx stock
    rbc intake manifold
    hybrid racing cai
    PML header
    kteller 3" exhaust
    rdx 410cc injectors
    its in a 93 civic sedan

  7. #97
    Registered User
    Join Date
    May 2021
    Location
    Ohio
    Posts
    2
    Anyone have a kal for a
    k20a2 04 rsx type s
    4-2-1 DC headers
    1320 resonated test pipe
    DC catback
    skunk2 pro series intake manifold
    cai (not sure what brand)

    IF not any advice for a kpro basemap i should choose to start with these mods?

  8. #98
    Registered User
    Join Date
    Jan 2018
    Location
    Frisco,Tx
    Posts
    8
    Anyone have a kal for a
    k20a2 w/ k24 cams
    bottom end completely stock
    prb mani with hondata intake gasket
    Aem short ram intake
    4-2-1 race header
    straight pipe
    2.5in catback


    if not then any advice would be greatly appreciated, and like post above, recommendation on what kal to run would be helpful.
    THANKS IN ADVANCE!!

Page 7 of 7 FirstFirst ... 567

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •