Close

Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 98
  1. #46
    Registered User ilovemyep3's Avatar
    Join Date
    Feb 2009
    Location
    Tampa fl
    Posts
    42
    Quote Originally Posted by Ba82Ep3 View Post
    Im posting up a basic k20a3 I/RH/E HiOc basemap i put together with some WOT street tuning and some partial throttle tuning including ignition advance on the 10, 20, 30 degree maps.

    Its the most commonly asked for basemap and it should do you well for quite a while.

    *lo cam not tuned, all hi cam... 2krpm and up. Rev limit 7300rpm. No fuel economy (highway) tuning. Check immobilizer if needed.*

    Attachment 5759
    How well would this work with stage1 cams and I/RH/E ?

  2. #47
    Registered User 04sidriver's Avatar
    Join Date
    Jun 2004
    Location
    Fredericksburg, Virginia, United States
    Posts
    181
    Quote Originally Posted by ilovemyep3 View Post
    How well would this work with stage1 cams and I/RH/E ?
    I have a map for s2 stage 1 cams and i/h/e

  3. #48
    Registered User ilovemyep3's Avatar
    Join Date
    Feb 2009
    Location
    Tampa fl
    Posts
    42
    Awsome I just bought kpro and been trying to find a tune for my setup so if you could post it that would be great thank you in advance

  4. #49
    Registered User 04sidriver's Avatar
    Join Date
    Jun 2004
    Location
    Fredericksburg, Virginia, United States
    Posts
    181
    Quote Originally Posted by ilovemyep3 View Post
    Awsome I just bought kpro and been trying to find a tune for my setup so if you could post it that would be great thank you in advance
    I can post it tonight

  5. #50
    Registered User ilovemyep3's Avatar
    Join Date
    Feb 2009
    Location
    Tampa fl
    Posts
    42
    No prob thank you

  6. #51
    0EM xEcuTi0n Ba82Ep3's Avatar
    Join Date
    Feb 2006
    Location
    Mobile, AL
    Posts
    2,251
    Quote Originally Posted by ilovemyep3 View Post
    How well would this work with stage1 cams and I/RH/E ?
    Which cams? (S2 cams? I started with those years ago). It would work well as there is enough fuel there... but a little street tuning would make it better.

  7. #52
    Registered User ilovemyep3's Avatar
    Join Date
    Feb 2009
    Location
    Tampa fl
    Posts
    42
    Yeah skunk 2 stage 1 cams

  8. #53
    Registered User 04sidriver's Avatar
    Join Date
    Jun 2004
    Location
    Fredericksburg, Virginia, United States
    Posts
    181
    Here is my tune. My ep has s2 stage 1 cams, h/i/e

    eTune#8.kal

  9. #54
    Registered User ilovemyep3's Avatar
    Join Date
    Feb 2009
    Location
    Tampa fl
    Posts
    42
    Thanx will try it tomorrow if I get a chance will let you know how it.works out

  10. #55
    Registered User boricua4life's Avatar
    Join Date
    Jan 2009
    Location
    Atlanta, GA
    Posts
    162
    Need a 06 tsx i/h/e 70mm thottle body kal plz

  11. #56
    nothing to see here Slip_Angle's Avatar
    Join Date
    Jun 2003
    Location
    Winnipeg, Canada
    Posts
    703
    Quote Originally Posted by boricua4life View Post
    Need a 06 tsx i/h/e 70mm thottle body kal plz
    Attachment 5893

  12. #57
    Registered User boricua4life's Avatar
    Join Date
    Jan 2009
    Location
    Atlanta, GA
    Posts
    162
    Thank you kindly sir;)

  13. #58
    nothing to see here Slip_Angle's Avatar
    Join Date
    Jun 2003
    Location
    Winnipeg, Canada
    Posts
    703
    Quote Originally Posted by boricua4life View Post
    Thank you kindly sir;)
    You bet. Let me know how it works for you. Vtec is 4000. I also have a 50* VTC and goto 45* at switch over. If you still have the stock VTC it'll be limited to 25*.

  14. #59
    Registered User rd02SiR's Avatar
    Join Date
    Apr 2008
    Location
    Ottawa
    Posts
    816
    anyone have a tune for k20a3 CAI, shorty header, oem cat, megan mid and spoon axelback?

  15. #60
    Registered User Reaper27's Avatar
    Join Date
    May 2009
    Location
    Charlotte
    Posts
    339
    Anyone have a map for stage 2 cams (skunk2), CAI/RH/I? I'm going to swap my head stuff in soon and would like to run a map till I can get it to the tuner. Thanks guys

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •