Close

Page 6 of 7 FirstFirst ... 4567 LastLast
Results 76 to 90 of 98
  1. #76
    Registered User SHHEP33555's Avatar
    Join Date
    May 2011
    Location
    hbg
    Posts
    17
    Anyone have a kal. for a stock k24a1 with apexi N'1 cat back, short ram intake, skunk2 intake mani? Thanks for the help!

  2. #77
    WrongFitmentCrew#193 BlueEP3's Avatar
    Join Date
    Apr 2008
    Location
    Smyrna, TN
    Posts
    231
    Hello friendly ephatchers,

    I'm currently using the k20a2 greddy turbo kit 550cc calibration and it runs lean at WOT at about 12.5 a/f and 6.5 psi. Please help with a calibration good enough for daily with some decent power gains. The closest place to me that tunes is 4 hours away. I really don't want to change any of the parameters risking a motor. I have listed the mods that I have below.

    Anyone want to help a friendly ephatcher with a calibration close to my setup?

    Mods:
    K20a2 motor and tranny
    Rc SL4-550cc injectors
    Turbonetics T04B-S 50 trim (single Ball Bearing)
    Tial 38mm wastegate 7.25 psi spring T'd off from brake booster.
    Log style turbo manifold
    Hks ver.2 bov
    2.5 exhaust piping
    Stock EP fuel pump
    Last edited by BlueEP3; 12-10-2012 at 03:50 PM.

  3. #78
    Registered User m3nace's Avatar
    Join Date
    Feb 2012
    Location
    garden grove
    Posts
    211
    Anyone have a set up that could help me out?
    06 k24a2 stock
    Invidia exhaust
    Injen cai
    Rbc intake mani
    5 spd ep3 tranny

  4. #79
    Registered User gtecd20's Avatar
    Join Date
    Jun 2010
    Location
    Chandler, Arizona, United States
    Posts
    213
    need one for a k20a3
    mods
    JRSC street
    DCrh
    I/E 2.5 pipe

    thanks guys

  5. #80
    WrongFitmentCrew#193 BlueEP3's Avatar
    Join Date
    Apr 2008
    Location
    Smyrna, TN
    Posts
    231
    Quote Originally Posted by BlueEP3 View Post
    Hello friendly ephatchers,

    I'm currently using the k20a2 greddy turbo kit 550cc calibration and it runs lean at WOT at about 12.5 a/f and 6.5 psi. Please help with a calibration good enough for daily with some decent power gains. The closest place to me that tunes is 4 hours away. I really don't want to change any of the parameters risking a motor. I have listed the mods that I have below.

    Anyone want to help a friendly ephatcher with a calibration close to my setup?

    Mods:
    K20a2 motor and tranny
    Rc SL4-550cc injectors
    Turbonetics T04B-S 50 trim (single Ball Bearing)
    Tial 38mm wastegate 7.25 psi spring T'd off from brake booster.
    Log style turbo manifold
    Hks ver.2 bov
    2.5 exhaust piping
    Stock EP fuel pump


    anyone ^ ? (bump)

    my a/f lines are pretty bouncy

    i was wondering if the stock ep fuel pump can handle the amount of boost or hp or if this setup can even handle it.
    Last edited by BlueEP3; 12-10-2012 at 03:53 PM.

  6. #81
    2.4L's of Fun! 1GR8EP3's Avatar
    Join Date
    Apr 2008
    Location
    916 ArEa
    Posts
    821
    Quote Originally Posted by BlueEP3 View Post
    anyone ^ ? (bump)

    my a/f lines are pretty bouncy

    i was wondering if the stock ep fuel pump can handle the amount of boost or hp or if this setup can even handle it.
    have you tried the rev-hard kal?

  7. #82
    Registered User gtecd20's Avatar
    Join Date
    Jun 2010
    Location
    Chandler, Arizona, United States
    Posts
    213
    Quote Originally Posted by gtecd20 View Post
    need one for a k20a3
    mods
    JRSC street
    DCrh
    I/E 2.5 pipe

    thanks guys
    anyone?

  8. #83
    Registered User sawiresa's Avatar
    Join Date
    Oct 2009
    Location
    Toronto, Ontario, Canada
    Posts
    5
    any kal for a vtec killer set up with the A2 rocker set up ?

  9. #84
    Registered User gtecd20's Avatar
    Join Date
    Jun 2010
    Location
    Chandler, Arizona, United States
    Posts
    213
    my fuel timming seems to be off anyone got a .kal for a

    stock k20a3
    JRSC-4.0puley
    630cc injectors
    intake
    DCRH
    greddy 2.5 exhaust

    im useing the base map but needs to see if anyone has a better one or if using the 3.8 pulley ones would help or make it worse

  10. #85
    0EM xEcuTi0n Ba82Ep3's Avatar
    Join Date
    Feb 2006
    Location
    Mobile, AL
    Posts
    2,251
    I have a KAL i recently completed for k24/k20 N/A builds. Its basic like the k20a3 KAL i posted before... so if anyone is interested i can post it up as well.

    It was tuned on this setup:

    k24a2/k20z3

    -k24a2 block
    -k20z3 head
    -RBC IM
    -SRI
    -JRRH
    -TSX Injectors

  11. #86
    明らかにド素人 JDM SHIT! playap07's Avatar
    Join Date
    Apr 2008
    Location
    Beale AFB....
    Posts
    1,120
    Quote Originally Posted by davisj3537 View Post
    Kpro
    K24a1
    Too many mods to list
    50 trim cybernation setup @ 10lbs of boost
    301whp 300wtq
    Tuned @ 50 degrees F
    Stoopid Tuned
    Attachment 339
    Thank you davis! hopefully this will hold me down untill i get a tune!

  12. #87
    Registered User
    Join Date
    Dec 2010
    Location
    Texas
    Posts
    566
    Well, I may as well ask here.
    Anyone have a kal for:
    A2, RBC manifold, cai, DCRH (will be upgrading soon), Mugen exhaust and Skunk2 stage 1 cams? Car runs on 93 octane if that makes a difference.
    Need a solid Kal as tuning is gonna be limited by cost and I will have to drive the car up to Austin or Houston.
    Hell, I am willing to pay for a dyno tuned kal.

  13. #88
    Registered User perspective's Avatar
    Join Date
    Jul 2013
    Location
    Hialeah Florida
    Posts
    27

    back from the dead

    How good would this work without the race headers.
    "
    Ba82Ep3
    Im posting up a basic k20a3 I/RH/E HiOc basemap i put together with some WOT street tuning and some partial throttle tuning including ignition advance on the 10, 20, 30 degree maps.

    Its the most commonly asked for basemap and it should do you well for quite a while.

    *lo cam not tuned, all hi cam... 2krpm and up. Rev limit 7300rpm. No fuel economy (highway) tuning. Check immobilizer if needed.*" It's in page 3 of this forum

    k20a3IHE.kal
    I have mega ram intake injen( I also have injen cai , when is not raining

  14. #89
    Registered User
    Join Date
    Jul 2008
    Location
    Los Angeles
    Posts
    12
    K20a3
    stock internals
    Stock Injectors
    Stock I/E manifolds
    AEM V2 Intake
    Buddy Club Pro Spec Exhaust
    87 Octane

    Street tuned for 13.5 AF @ WOT. I don't remember if I tuned part throttle.

    Ignition timing and cam adjustments untouched.
    EP3 Final.zip

  15. #90
    Registered User jerrymouas's Avatar
    Join Date
    Mar 2009
    Location
    nc
    Posts
    45
    Didn't want to start a new thread, need a help with starting base map Kal..
    Cxracing turbo kit
    Stock k20a3
    8 to 10 psi
    Kpro V4
    RC 750cc injectors
    Walbro 255
    2.5" exhaust
    Will it be safe to run the Rev-hard 12ohm map so I can get the it to the muffler shop which is 4 mile away to weld the my Downpipe on? Anyone got something si miler I can use?

Page 6 of 7 FirstFirst ... 4567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •