How to properly use Apostrophes
The rev limiter is not meant to be used as a shift light
What IM are you running?
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
hmmm, ive done that many times tho....keeps giving me diff numbers....like i'll do that and it'll say .8 low and 99.2 high and thats it? then its reset? cause sometimes i'll hit the low one, repeatedly and the number changes....goes from 2.4 to 2.8 to 2.4 to 2.8 to 2.4 to 2.8, somtimes it stays at the number its reading.....but that doesnt help the bounce.....
Last edited by SyckSiR; 05-02-2008 at 09:18 AM.
not a whole lot, but how can it be tunning....the car has worked fine for over 3 weeks now.....why would this just pop up?? Also for the most part everything works fine while driving.,....its just at idle that htings are messed....but like i said in the first post my idle was perfect for the past few weeks.....
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Follow up on where Doug is going but when you take the TPS readings, keep the lowest value for the minimum and highest for maximum that you have gotten ALL the times you have taken the readings. That way, you won't hit negative numbers on the TPS value.
Didn't see this before; definitely sounds like an EVAP system issue but moreover a vacuum leak.
Last edited by jimmyjames; 05-02-2008 at 10:04 AM.
How to properly use Apostrophes
The rev limiter is not meant to be used as a shift light
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
Yes, that's part of the system, check page 11-170 in the service manual for locations.
Do procedure Step 3 on page 11-175 and step 1 on 11-180 to check EVAP valve
For PCV... http://www.ephatch.com/forum/showthread.php?t=43578
Last edited by jimmyjames; 05-02-2008 at 10:44 AM.
How to properly use Apostrophes
The rev limiter is not meant to be used as a shift light
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks