Close

Page 4 of 10 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 148
  1. #46
    Site Sponsor MadLorEP3's Avatar
    Join Date
    May 2009
    Location
    The City of Angels
    Posts
    1,027
    Quote Originally Posted by lldiesel386ll View Post
    update

    i have only driven the car a little over 350 miles with the new lsd and 6th gear, but the 5-6 sleeve set seem unnecessary--i have had no problems with the transmission thus far :thumb:
    :knock on wood:

    here is my parts list--stuff necessary to put that gear in
    24240-PNS-000 PIECE, REVERSE SHIFT 1
    24430-PNS-000 INTERLOCK 1
    24201-RAS-000 FORK, FIFTH-SIXTH GEARSHIFT 1
    23590-RAS-A00 GEAR, MAINSHAFT SIXTH 1
    91103-RAS-003 BEARING, NEEDLE (35X41X24) 1
    23916-PNS-000 COLLAR, DISTANCE (28X35X24) 1
    90011-PPP-000 BOLT, SPECIAL (20X25) 1
    23491-RAS-000 GEAR, COUNTERSHAFT SIXTH 1
    that elementownersclub thread was very helpful, when used hand in hand with the service manual of an rsx s
    so i guess this is not needed

    Synchronizer sleeve set(5-6) 23626-PNS-305 $264.40

    can the op update the first post
    that would be great
    thanks

  2. #47
    mmm...torque :D
    Join Date
    Apr 2008
    Location
    NJ
    Posts
    402
    Quote Originally Posted by madlorglk View Post
    so i guess this is not needed

    Synchronizer sleeve set(5-6) 23626-PNS-305 $264.40

    can the op update the first post
    that would be great
    thanks
    holy crap that was long ago...

    swapped at 29505 miles, getting around 65 now. outside of my need to flush my oil out, no problems there was an update to that about a year ago, but that was lost to the second crash. oh well--no new/interesting news missed on this thread on my part since then

  3. #48
    Site Sponsor MadLorEP3's Avatar
    Join Date
    May 2009
    Location
    The City of Angels
    Posts
    1,027
    Maybe i missed it but i dont remember anything being mentioned about getting either a z3 or type s shifter mechanism

  4. #49
    mmm...torque :D
    Join Date
    Apr 2008
    Location
    NJ
    Posts
    402
    i dont recall purchasing any different mechanisms outside of the first two parts its been just about two years since i have cracked open that transmission case. i am currently in the middle of trying to find a house--when things settle down on my end i will look up what was needed

  5. #50
    Site Sponsor MadLorEP3's Avatar
    Join Date
    May 2009
    Location
    The City of Angels
    Posts
    1,027
    5SPD EP3 CONVERSION TO 6SPD PARTS LIST:

    I know that part number 1 is not listed on the original list but Im wondering why the clubrsx peoples say they are needed
    does anyone know if part 1 is needed
    1. Honda Single Cone Synchronizer (23641-PPP-000) Ring, Blocking (66SZ)
    ($28.94)

    2. Reverse shift piece 24240-PNS-000 (02-06 RSX/04-09 TSX) $35.70
    3. Interlock 24430-PNS-000 (02-06 RSX/04-09 TSX) $22.34
    4. Fork, Fifth-Sixth Gearshift 24201-RAS-000 (04-09TSX)$53.76
    5. Mainshaft Sixth Gear 23590-RAS-A00 (06-08 TSX) $57.60
    6. Needle Bearing 91103-RAS-003 (35x41x24)(06-09 TSX) $7.69
    7. Distance Collar 23916-PNS-000 (28x35x24) (02-06 RSX/04-09 TSX) $4.24
    8) Bolt, Special (20X25) 90011-PPP-000 (02-06 RSX/04-09 TSX) $4.94
    9) Countershaft sixth gear 23491-RAS-000 (04-08 TSX) $50.53
    Last edited by MadLorEP3; 04-18-2010 at 05:08 PM.

  6. #51
    4 TDs in Single Game usedep3's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Posts
    2,314
    Quote Originally Posted by madlorglk View Post
    5SPD EP3 CONVERSION TO 6SPD PARTS LIST:

    I know that part number 1 is not listed on the original list but Im wondering why the clubrsx peoples say they are needed
    does anyone know if part 1 is needed
    1. Honda Single Cone Synchronizer (23641-PPP-000) Ring, Blocking (66SZ)
    ($28.94)

    2. Reverse shift piece 24240-PNS-000 (02-06 RSX/04-09 TSX) $35.70
    3. Interlock 24430-PNS-000 (02-06 RSX/04-09 TSX) $22.34
    4. Fork, Fifth-Sixth Gearshift 24201-RAS-000 (04-09TSX)$53.76
    5. Mainshaft Sixth Gear 23590-RAS-A00 (06-08 TSX) $57.60
    6. Needle Bearing 91103-RAS-003 (35x41x24)(06-09 TSX) $7.69
    7. Distance Collar 23916-PNS-000 (28x35x24) (02-06 RSX/04-09 TSX) $4.24
    8) Bolt, Special (20X25) 90011-PPP-000 (02-06 RSX/04-09 TSX) $4.94
    9) Countershaft sixth gear 23491-RAS-000 (04-08 TSX) $50.53
    did you find out if the: Honda Single Cone Synchronizer (23641-PPP-000) Ring, Blocking (66SZ) ($28.94)
    was needed?

    i opted to not get the 5-6 syncro set. does that mean i need this single cone syncro?
    Green Crew #7

    Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals

    Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2

  7. #52
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114
    wow, my shit got deleted. i had some good info on here.

  8. #53
    Registered User MajorJones's Avatar
    Join Date
    Jun 2008
    Location
    Washington 360
    Posts
    432
    Why dont you just swap the DC-R tranny in? 6th gear plus a short final drive. Doing 70 with it am at about 3k. i can make a 250 trip on a full tank of gas and still able to drive around for about 2 day before the light turns on. i figure if your going to spend the money might as well. Props to you on building it yourself, good luck man

  9. #54
    ephatch member Anrasmor's Avatar
    Join Date
    Aug 2010
    Location
    Arlington, TX
    Posts
    131
    Quote Originally Posted by madlorglk View Post
    5SPD EP3 CONVERSION TO 6SPD PARTS LIST:

    I know that part number 1 is not listed on the original list but Im wondering why the clubrsx peoples say they are needed
    does anyone know if part 1 is needed
    1. Honda Single Cone Synchronizer (23641-PPP-000) Ring, Blocking (66SZ)
    ($28.94)

    2. Reverse shift piece 24240-PNS-000 (02-06 RSX/04-09 TSX) $35.70
    3. Interlock 24430-PNS-000 (02-06 RSX/04-09 TSX) $22.34
    4. Fork, Fifth-Sixth Gearshift 24201-RAS-000 (04-09TSX)$53.76
    5. Mainshaft Sixth Gear 23590-RAS-A00 (06-08 TSX) $57.60
    6. Needle Bearing 91103-RAS-003 (35x41x24)(06-09 TSX) $7.69
    7. Distance Collar 23916-PNS-000 (28x35x24) (02-06 RSX/04-09 TSX) $4.24
    8) Bolt, Special (20X25) 90011-PPP-000 (02-06 RSX/04-09 TSX) $4.94
    9) Countershaft sixth gear 23491-RAS-000 (04-08 TSX) $50.53
    I've been looking around for the last 2 weeks or so online and am still having a hard time finding a complete parts list for just the conversion aspect of adding the 6th gear to an ep3. So I emailed clubrsx technical support and they gave me a list of what they say you need. I'm hoping somebody who has done it before will be able to verify if this list is correct or the one posted by madlorglk. Here's the list from crsx:

    Along with the TSX6th package you will also need these parts:

    23916-PNS-000
    24201-PNS-010
    24240-PNS-000
    24210-PNS-010
    24430-PNS-000
    24412-PNS-000

    This also appears on the clubep3 site. I'm assuming these are pretty much the same parts but Acura part numbers. They do mention that this is all you need to add the 6th gear to the A3:

    http://www.clubrsx.com/clubep3/tsxgears.html
    Last edited by Anrasmor; 08-18-2010 at 05:33 AM.

  10. #55
    Registered User
    Join Date
    Aug 2010
    Location
    Minneapolis, Minnesota
    Posts
    2

    How you guys do it?

    Wow you guy are awesome. I'm a newbie at fixing cars so could any show me or explain how to add the 6th gear? like pictures or step by step? I would like to add 6th gear to me 04 ep3. I also want to know if adding the 6th gear will add any torque and horse? is there like a way that the TSX tranny could fit onto our k20a3?

  11. #56
    Registered User
    Join Date
    Oct 2010
    Location
    artesia new mexico
    Posts
    1
    i have a 2004 civic si with the k20a3 5 speed transmission can i put the JDM Civic EP3 K20A NPR3 Type R 6 Speed Transmission (LSD Equipped/4.764 FD)

  12. #57
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114
    Quote Originally Posted by bluejayxiong View Post
    Wow you guy are awesome. I'm a newbie at fixing cars so could any show me or explain how to add the 6th gear? like pictures or step by step? I would like to add 6th gear to me 04 ep3. I also want to know if adding the 6th gear will add any torque and horse? is there like a way that the TSX tranny could fit onto our k20a3?
    since i was goig to do this last year, i'll take pictures this year when i take it apart. for this thread.
    No, the tsx tranny will not fit, it bolts to the frame differently. its only swappable between accords and tsx's

    Quote Originally Posted by jonathanep3 View Post
    i have a 2004 civic si with the k20a3 5 speed transmission can i put the JDM Civic EP3 K20A NPR3 Type R 6 Speed Transmission (LSD Equipped/4.764 FD)
    yes, but search next time.
    Last edited by AKEP; 10-22-2010 at 07:58 AM.

  13. #58
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114
    ok guys, got this ready to order next month (end of november) and an LSD.

    Reverse shift piece 24240-PNS-000 (02-06 RSX/04-09 TSX)
    Interlock 24430-PNS-000 (02-06 RSX/04-09 TSX)
    Fork, Fifth-Sixth Gearshift 24201-RAS-000 (04-09TSX)
    Mainshaft Sixth Gear 23590-RAS-A00 (06-08 TSX)
    Needle Bearing 91103-RAS-003 (35x41x24)(06-09 TSX)
    Distance Collar 23916-PNS-000 (28x35x24) (02-06 RSX/04-09 TSX)
    Bolt, Special (20X25) 90011-PPP-000 (02-06 RSX/04-09 TSX)
    Countershaft sixth gear 23491-RAS-000 (04-08 TSX)
    3rd gear set for ep3/rsx

    came out to like $462 shipped.

  14. #59
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    Quote Originally Posted by bluejayxiong View Post
    is there like a way that the TSX tranny could fit onto our k20a3?
    No it will not fit, BUT you can crack it open and slip the complete internals in to the EP3's 5 spd case...

    Quote Originally Posted by jonathanep3 View Post
    i have a 2004 civic si with the k20a3 5 speed transmission can i put the JDM Civic EP3 K20A NPR3 Type R 6 Speed Transmission (LSD Equipped/4.764 FD)
    Yes
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  15. #60
    4 TDs in Single Game usedep3's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Posts
    2,314
    Quote Originally Posted by AKEP View Post
    ok guys, got this ready to order next month (end of november) and an LSD.

    Reverse shift piece 24240-PNS-000 (02-06 RSX/04-09 TSX)
    Interlock 24430-PNS-000 (02-06 RSX/04-09 TSX)
    Fork, Fifth-Sixth Gearshift 24201-RAS-000 (04-09TSX)
    Mainshaft Sixth Gear 23590-RAS-A00 (06-08 TSX)
    Needle Bearing 91103-RAS-003 (35x41x24)(06-09 TSX)
    Distance Collar 23916-PNS-000 (28x35x24) (02-06 RSX/04-09 TSX)
    Bolt, Special (20X25) 90011-PPP-000 (02-06 RSX/04-09 TSX)
    Countershaft sixth gear 23491-RAS-000 (04-08 TSX)
    3rd gear set for ep3/rsx

    came out to like $462 shipped.
    are you planning to do the work yourself?
    Green Crew #7

    Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals

    Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2

Page 4 of 10 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •