Close

Page 4 of 24 FirstFirst ... 2345614 ... LastLast
Results 46 to 60 of 356
  1. #46
    * jeenyusss's Avatar
    Join Date
    May 2006
    Location
    ny
    Posts
    1,962
    Quote Originally Posted by supercivician View Post
    hopefully i can get the print out for the tune because the guy that did it came from another shop. but i can post the pics before it blew and all the paper works
    demand to see datalogs and printouts, bc thats bs if they dont.

    if all you signed is the credit card slip and were not advised of waiving any rights i would personally take them to court if they do not help you.


    please post any and every pic you can

    just by even looking at the car we might not be able to tell what happened

  2. #47
    MaNtEQuiLLA/K-SQUADD ALL MotoR Ep3's Avatar
    Join Date
    Apr 2008
    Location
    Long Island
    Posts
    430
    DAMN.....thats crazy you must have had a lot of power in that a2......i wish you the best man...because i know how it feels to spend money on it.....but i hope your new build comes out stronger....best of luck

  3. #48
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    Quote Originally Posted by jeenyusss View Post
    demand to see datalogs and printouts, bc thats bs if they dont.

    if all you signed is the credit card slip and were not advised of waiving any rights i would personally take them to court if they do not help you.


    please post any and every pic you can

    just by even looking at the car we might not be able to tell what happened
    Fastlane dose not make you sign anyting either but, they put it in there policy for the shop and it's in the fine print on the back of the bill.

  4. #49
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    Quote Originally Posted by ALL MotoR Ep3 View Post
    DAMN.....thats crazy you must have had a lot of power in that a2......i wish you the best man...because i know how it feels to spend money on it.....but i hope your new build comes out stronger....best of luck
    lol 250 hp in an a2 is not alot of power. that's a very safe amount.

  5. #50
    MaNtEQuiLLA/K-SQUADD ALL MotoR Ep3's Avatar
    Join Date
    Apr 2008
    Location
    Long Island
    Posts
    430
    Quote Originally Posted by supercivician View Post
    and i was only making 253whp before the motor blew
    Damn that is too lil power especially for stock compression and that many lbs of boost....

  6. #51
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    for that kind of power it sounds like he never made it over 5000 rpm's. hell i made around 280 crank hp at 4600 rpms.

  7. #52
    MaNtEQuiLLA/K-SQUADD ALL MotoR Ep3's Avatar
    Join Date
    Apr 2008
    Location
    Long Island
    Posts
    430
    Quote Originally Posted by clutch797 View Post
    lol 250 hp in an a2 is not alot of power. that's a very safe amount.
    i kno but i didnt see the 2nd page i just read the first page and posted what I did but I know thats not good at all because a a3 + cybernation kit makes like 260 and 8lbs of boost and the compression is 9:8:1 on a3 and a stock type-S has 11:0:1 compression + boost should of hit 250 hp at like 5 or 6lbs of boost...

  8. #53
    Jeri Lee is hot!! supercivician's Avatar
    Join Date
    Apr 2008
    Location
    jersey
    Posts
    453
    Another Was That I Was Looking At The Boost Gauge And It Said It Was Doing About 25psi. But The Tuner Said He Did It At 10psi.
    So Idk

    but it wont make sense if the car hit 25psi only making 253whp
    Last edited by supercivician; 05-02-2008 at 04:01 PM.

  9. #54
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    at 10 psi on an a2 he should have been around 350

  10. #55
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    Quote Originally Posted by supercivician View Post
    Another Was That I Was Looking At The Boost Gauge And It Said It Was Doing About 25psi. But The Tuner Said He Did It At 10psi.
    So Idk
    WTF 25 PSI, did the tuner have a kink in his fucking hose? if your gauge was spot on then that's why you blew your motor. What kind of gauge did you have and were did you have it runing into? 25psi will blow the motor in no time.

  11. #56
    MaNtEQuiLLA/K-SQUADD ALL MotoR Ep3's Avatar
    Join Date
    Apr 2008
    Location
    Long Island
    Posts
    430
    Quote Originally Posted by clutch797 View Post
    for that kind of power it sounds like he never made it over 5000 rpm's. hell i made around 280 crank hp at 4600 rpms.
    I made more that what he made whp wit semi built k24 when i had it b4 it blew up doing to a tuner leaning the shyt out of my tuning......so i know he could of and should of made more wit that that many lbs of boost. after that i just gave up builidng motors and bought a k20a

  12. #57
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    I'm street tuning my k24a1 now and i'm looking good so far. 12.8 - 13.6 from 3000 to redline. with only a few knocks.

  13. #58
    Jeri Lee is hot!! supercivician's Avatar
    Join Date
    Apr 2008
    Location
    jersey
    Posts
    453
    Quote Originally Posted by clutch797 View Post
    WTF 25 PSI, did the tuner have a kink in his fucking hose? if your gauge was spot on then that's why you blew your motor. What kind of gauge did you have and were did you have it runing into? 25psi will blow the motor in no time.

    but if it was at 25psi then how come it only made 253whp.

    im using an atuometer mechanical vac/boost gauge and idk where they ran the hose because they installed

  14. #59
    Registered User clutch797's Avatar
    Join Date
    Apr 2008
    Location
    Tx
    Posts
    545
    Quote Originally Posted by supercivician View Post
    but if it was at 25psi then how come it only made 253whp.

    im using an atuometer mechanical vac/boost gauge and idk where they ran the hose because they installed
    If you had a boost leak or the timing was pulled way the hell back is the only thing i can think of. But 25 psi will blow the motor with out a doubt. when i had mine tuned one degree to timing was worth 10hp.

  15. #60
    Jeri Lee is hot!! supercivician's Avatar
    Join Date
    Apr 2008
    Location
    jersey
    Posts
    453
    im basicly sol because if i want to bring it to let said evan tuning..that makes i have to get it tow and that involves money

Page 4 of 24 FirstFirst ... 2345614 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •