Where to get ep3r brake pads.

[shivic]

i need some brake pads for my ep3 ctr. can't find them anywhere.

please help.

[miragetkg]

You have a civic type r?

[shivic]

You have a civic type r?

yes, and parts are a pain in the a$$

[MugsyTheGr8]

if im not mistaken, the ctr calipers are the same as the ones used on the rsx-s and the honda s2000. don't take my word on that though, do some research on it.

[miragetkg]

yes, and parts are a pain in the a$$

Good luck finding Type R parts in the states. Post up some pictures of your ride?

[liquid cooled]

if im not mistaken, the ctr calipers are the same as the ones used on the rsx-s and the honda s2000. don't take my word on that though, do some research on it.

Correct.

[LAvtec818]

i need some brake pads for my ep3 ctr. can't find them anywhere.

please help.

damn u, post up some pix, we don't see a ep3 CTR in the states usually. Just order the pads from Japan. Hit up J san

[shivic]

if im not mistaken, the ctr calipers are the same as the ones used on the rsx-s and the honda s2000. don't take my word on that though, do some research on it.

i already tried. s2000 pads were way too small.

[siver-SI]

Have you tried to contact company's that are world wide in parts and see if they can get you the part number?

[thaseint]

Use RSX-S pads...exact same calipers.

[b.r.i.a.n.]

Use RSX-S pads...exact same calipers.

x2. i know because i actually bought the ctr calipers. i took off my front wheel and measured the width and length of the calipers. they're the same. the only difference is that the ctr caliper says "type-r"

[OPTIMISE]

Good luck finding Type R parts in the states. Post up some pictures of your ride?

look about a quarter of the way down for pics of this dude's imported JDM CTR...

http://www.honda-tech.com/zerothread...63862&page=101

[b.r.i.a.n.]

look about a quarter of the way down for pics of this dude's imported JDM CTR...

http://www.honda-tech.com/zerothread...63862&page=101

nice! oh and before i forget i still have rear calipers off the ep3 ctr brake setup i bought. the rears are the exact same as the ep3 and rsx both base and type-s models. the only thing that differs is the bolt pattern on the 02-03 ep3 being 4 lug. there were some numbers on the rear calipers which seemed to be the part number. those matched the ones on my car.

[miragetkg]

yes, and parts are a pain in the a$$

Wow, I just saw your ride on honda-tech. Nice car but I can see finding parts must be a pain.

[b.r.i.a.n.]

Wow, I just saw your ride on honda-tech. Nice car but I can see finding parts must be a pain.

it really shouldn't. most ep3 parts are compatible between jdm and usdm ep3's. i can see some minor exceptions though.