k24 pros and cons

[clizoman]

my mpg isnt that bad...on my k24

[davisj3537]

i was asking about the six speed swap for some reason i think i read the a3 ecu won't work with the 6 speed

Your ecu doesn't recognize the difference.... You can run a 6spd with the stock ecu.

[davisj3537]

You don't HAVE to get Kpro with the K24a1 swap but you will need 310 (Type-S) injectors to run on the stock ECU which is currently what im doing, but iv run into a running lean issue so I will be getting Kpro within the next week. The torque is REALLY noticeably different and not to mention the VTec is stronger, specially in 3rd :scared:

You must be having lean issues from the bolt ons. I know w/o bolt ons there is no lean issue so you are getting more air from the boltons and its not adding fuel from lack of kpro.

[talonXracer]

The K24 platform responds VERY well to simple bolt-ons, due to it's abillity to pump alot of air each engine revolution. I wouldnt doubt at all it is running lean.

[03Si757]

The K24 platform responds VERY well to simple bolt-ons, due to it's abillity to pump alot of air each engine revolution. I wouldnt doubt at all it is running lean.

Ordered KPro today along with my Innovatives Went with a special a vendor on here is having so I should get around Friday.

[weltall]

i know your location says newport news but i have seen a blue ep with a black bumper on newriver

is that you

[03Si757]

i know your location says newport news but i have seen a blue ep with a black bumper on newriver

is that you

I doubt it, i dont even know where that is lol.

[arthur]

what should i get first, a kpro or a k24a1??

[03Si757]

what should i get first, a kpro or a k24a1??

Good question, Id say KPro. I wish I got it first but I was forced to buy a new motor.