Close

Results 1 to 14 of 14

Thread: 1.5 drop Q????

  1. #1
    R.I.P car locoep3's Avatar
    Join Date
    Apr 2008
    Location
    209 T-Town
    Posts
    336

    Question 1.5 drop Q????

    will i need to get a amber kit if i drop 1.5 on my ep ?????? and can i use my stock shocks.?

  2. #2
    Banned
    Join Date
    Apr 2008
    Location
    Fortreee,NJ
    Posts
    1,196
    I am not a fan of putting drop springs on stock shocks. Shock are just there to dampen the rebound of a spring. Change the spring to a Higher rate and you should upgrade the damper....But I really like great handling cars. I will but my ep3 up against just about any car on these boards....My advise is
    1) do not lower you ep3 more than a inch without rollcenter correction.
    2) buy matched springs and dampers
    3) get camber kits for the front and rear because the stock alinment specs suck for our cars.....

  3. #3
    Autox4u.com MugsyTheGr8's Avatar
    Join Date
    Jan 2007
    Location
    Somerset County, NJ
    Posts
    3,154
    Quote Originally Posted by mustclime View Post
    I am not a fan of putting drop springs on stock shocks. Shock are just there to dampen the rebound of a spring. Change the spring to a Higher rate and you should upgrade the damper....But I really like great handling cars. I will but my ep3 up against just about any car on these boards....My advise is
    1) do not lower you ep3 more than a inch without rollcenter correction.
    2) buy matched springs and dampers
    3) get camber kits for the front and rear because the stock alinment specs suck for our cars.....
    troof
    troof
    troof

  4. #4
    R.I.P car locoep3's Avatar
    Join Date
    Apr 2008
    Location
    209 T-Town
    Posts
    336
    Quote Originally Posted by mustclime View Post
    I am not a fan of putting drop springs on stock shocks. Shock are just there to dampen the rebound of a spring. Change the spring to a Higher rate and you should upgrade the damper....But I really like great handling cars. I will but my ep3 up against just about any car on these boards....My advise is
    1) do not lower you ep3 more than a inch without rollcenter correction.
    2) buy matched springs and dampers
    3) get camber kits for the front and rear because the stock alinment specs suck for our cars.....
    so im guessin not too

  5. #5
    Registered User miragetkg's Avatar
    Join Date
    Apr 2008
    Location
    San Diego
    Posts
    46
    Quote Originally Posted by locoep3 View Post
    will i need to get a amber kit if i drop 1.5 on my ep ?????? and can i use my stock shocks.?
    You will need a camber kit for the drop. I don't recommend using the stock shocks/ struts. Do it the right way and get those shocks. Tokico blues should be ok and not expensive. Check out shox.com or ebay under jdmwerks.

  6. #6
    Autox4u.com MugsyTheGr8's Avatar
    Join Date
    Jan 2007
    Location
    Somerset County, NJ
    Posts
    3,154
    Quote Originally Posted by miragetkg View Post
    You will need a camber kit for the drop. I don't recommend using the stock shocks/ struts. Do it the right way and get those shocks. Tokico blues should be ok and not expensive. Check out shox.com or ebay under jdmwerks.
    have you ever order anything from shox.com? im curious about their service.

  7. #7
    Registered User
    Join Date
    Oct 2003
    Location
    the Bay, CA
    Posts
    86
    Get some D-spec Tokicos from Showstoppers...THey were on sale a couple weeks ago when I got mine.

    Even with minimal drop get a camber kit and get the car alignment set up right. either DIY or via shop. Read the high performance thread.
    http://www.ephatch.com/forum/showthread.php?t=43604

    I am running JDM drop up front and stock in back. (sometimes I carry heavy SCUBA gear in the trunk) Getting alignment done at 1.5 fron 1 deg in back.

    gonna run 225/45/17 so i didnt want to fill up the wheel wells too much.

  8. #8
    ↑ is a Pirate Zeth's Avatar
    Join Date
    Apr 2008
    Location
    Wilmington, NC
    Posts
    961
    how are progress competition coilovers as far as handling goes?

  9. #9
    Registered User miragetkg's Avatar
    Join Date
    Apr 2008
    Location
    San Diego
    Posts
    46
    Quote Originally Posted by MugsyTheGr8 View Post
    have you ever order anything from shox.com? im curious about their service.
    Shox.com is located here in San Diego. They are very professional and match pricing with anyone legit business. I've been purchasing through them since 1997.

  10. #10
    R.I.P car locoep3's Avatar
    Join Date
    Apr 2008
    Location
    209 T-Town
    Posts
    336
    ok thanks guys ..... i will look in to that then i was just thinking about my tires i have 205/55/R16 will it rub in my wheel well ?????

  11. #11
    Autox4u.com MugsyTheGr8's Avatar
    Join Date
    Jan 2007
    Location
    Somerset County, NJ
    Posts
    3,154
    whats your offset?

  12. #12
    R.I.P car locoep3's Avatar
    Join Date
    Apr 2008
    Location
    209 T-Town
    Posts
    336
    Quote Originally Posted by MugsyTheGr8 View Post
    whats your offset?
    not sure its the RSX rims


  13. #13
    Autox4u.com MugsyTheGr8's Avatar
    Join Date
    Jan 2007
    Location
    Somerset County, NJ
    Posts
    3,154
    ill look it up and get back to you.


    16x6.5 +45
    Last edited by MugsyTheGr8; 05-07-2008 at 07:53 PM.

  14. #14
    R.I.P car locoep3's Avatar
    Join Date
    Apr 2008
    Location
    209 T-Town
    Posts
    336
    Quote Originally Posted by MugsyTheGr8 View Post
    ill look it up and get back to you.


    16x6.5 +45
    thanks man

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •