Just got my rev hard kit!

[jeenyusss]

are we talking intake manifold or turbo manifold?

for turbo manifold i had to grind it a little to sneak a bolt past


intake many, do not grind!

[playap07]

are we talking intake manifold or turbo manifold?

for turbo manifold i had to grind it a little to sneak a bolt past


intake many, do not grind!

turbo manifold

I use the bkr8eix. Let me go and check that

there was a question about the gap on the spark plugs

[jeenyusss]

ohh the turbo manifold im all lsot i need sleep ill check back tommrow

[playap07]

yup! yup you good!

[dustyboner]

turbo manifold


there was a question about the gap on the spark plugs

i still say go with NGK BCPR7ES spark plugs, gapped to .028-.030

[playap07]

i still say go with NGK BCPR7ES spark plugs, gapped to .028-.030

i just dont feel like spending 33 bones on more spark plugs haha

[dustyboner]

i just dont feel like spending 33 bones on more spark plugs haha

they're only $1.98 a plug at advance auto parts

[Guardian]

I already said all that... And go to Honda to get the studs and nuts they are grade8

oooooooooooo okay! got ya! ill do that method then! it seem like an effective method right! i like that a lil better than grinding my mani! ill check out aces hardware tomorrow and see if they got any studs the same as the stock bolt! thanks ooooo also what spark plugs were you using? a question came up about the stock rsx plugs

[playap07]

they're only $1.98 a plug at advance auto parts

that must not be quality though? 1.98.........im askin for trouble with those ahahaha

[playap07]

I already said all that... And go to Honda to get the studs and nuts they are grade8

yea you did tell me that earier! so honda has the bolts for the mani? grade 8? just tell them i need some grade 8 studs and nuts?

[Guardian]

Tell them you need the studs and nuts for the exhaust manifold. And don't get those plugs when I get on my CPU ill get you the model of what plugs to get

yea you did tell me that earier! so honda has the bolts for the mani? grade 8? just tell them i need some grade 8 studs and nuts?

[playap07]

Tell them you need the studs and nuts for the exhaust manifold. And don't get those plugs when I get on my CPU ill get you the model of what plugs to get

hahaha alright! will do! i have the rsx type s plugs already in ma car should i use those for the time being, would it hurt?

[Guardian]

Which ones? The densos? Ik22 you can just use those that's what the ngk 7's are like

hahaha alright! will do! i have the rsx type s plugs already in ma car should i use those for the time being, would it hurt?

[playap07]

i have the ngk iridium 7s

[Guardian]

Just use those

i have the ngk iridium 7s