nice ass numbers for that kit,I had my jrsc at the same boost are you running the 3.7 or 3.8 pulley.
Got tuned again last weekend at a local shop called Speed Factory, they did a phenomenal job. The car feels very smooth. Spent several hours dyno tuning, and another hour or so on the street. Here are the Final Results 223whp/170tq. Dyno reads very similar to a mustang Dyno. For comparison, the initial 215 whp pull did 232 and 231 respectively on two area Dynojets, and 215 whp as well on another local mustang dyno.
Mods: Jrsc-r @ 9 psi (4" pulley)
K-pro tuned
DCRH
Injen 3" cai
Neuspeed Exhaust
Hondata img
Denso IK22 plugs, grounding kit, etc...
Last edited by kaisertj; 05-08-2008 at 02:17 PM.
nice ass numbers for that kit,I had my jrsc at the same boost are you running the 3.7 or 3.8 pulley.
I'm contemplating getting a JRSC-R, but I don't know how good it is with emissions... if good at all. Can anyone tell me?
good numbers man and gratz! i know you must be enjoying it were they keeping an eye by chance on your inlet temps? i always ask this cause i like seeing what everyone else runs at. when i tuned my 3.8" i was hitting the stratosphere at like 210 degrees that is really awesome though with the 4" pulley....i am jealous....haha
those are some nice numbers!!! Congrats!!!
Thank you to all the compliments!!!
I havent checked the inlet temps, I saw about 65-70 degrees for intake temps, and 170-175 for the coolant I think. Dont hold me to that, Still learning it all. I'll pull up the datalog and see what it said. Right now I awaiting install of 3.8" pulley, 2.5" idler, maxbore throttle body, and debating about installing the skunk 2 cams and valvetrain and also porting/polishing the charger intake manifold. Hope to have another dyno in July of it all. Thanks again!
Last edited by kaisertj; 05-09-2008 at 01:03 PM.
You have a cal file you'd like to share?
I'm running jrsc - jr header - 3" cai - k pro (a/f is all over the place) - stock injectors
It is sorry. I have bigger injectors and a smaller pulley but no belt yet. So I haven't put them on. I'm learning the kpro now.
what kind of times our ep would do on the track with the race kit?
any chance of being able to post that kal up?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks