Reply With QuoteYou will need a press to swap over the speed ring and bearings. and a set of feeler gauges to check shim clearances after reassembly.
what is needed for the installation of a dc5 type r lsd into our 5 speed, any special tools or parts needed or is it pretty straight forward swap. thanks.
You will need a press to swap over the speed ring and bearings. and a set of feeler gauges to check shim clearances after reassembly.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
so the speed ring and bearing on the dc5 lsd will not work on the ep3,the one I am going to get already has them on there well I dont know about the speed ring but I know it has the bearing.will I be able to use those or have to swap them out with the ones currently on the car.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks