Front emblem delete (picture inside)

[DRP967]

Here is a picture of a custom made "black out" emblem for my EP's front grill. We got the black plastic from Tap Plastics and my friend traced the empty space on the grill and cut/dremeled the plastic plate to fit. Its applied with 3M double sided tape just like the red h badge. What do you guys think? yay or nay? Just want some second opinions, regardless the "emblem" is staying on.

[Tnhatch03]

pretty neat. can you get a closer picture or maybe a different angle.

[Breakep3]

2nd that^

and your stealthed out ep is sick.

[PayneSkillet]

looks like you just took the stock emblem off?

[valley _boy]

tried it, but not for me. i thought it looked naked without one.

[kokopuffs405]

yeah kind of looks empty

[BaLisTek]

heres my similar contribution



sanded down the stock H location and fit the 04-05 CTR H on the USDM grill.

[DRP967]

pretty neat. can you get a closer picture or maybe a different angle.

2nd that^

and your stealthed out ep is sick.

looks like you just took the stock emblem off?

1. Since im without a camera, ill ask my friend(s) when they are free. This pic was from a Honda-Tech meet i attended today.

2. Thanks you

3. If you take the stock emblem off, theres 2 holes i believe and an indentation. This piece is basically a black piece of plastic, think of a "murdered" out JDM badge.

[DRP967]

tried it, but not for me. i thought it looked naked without one.

yeah kind of looks empty

heres my similar contribution



sanded down the stock H location and fit the 04-05 CTR H on the USDM grill.

1. yeah i felt that way at first, but i do like the debadged status.

2. ditto ^

3. Nice man, looks clean and flush.

[the JigGa mAn]

not a fan till i see better pics

i want to remove my front H as well, but it would look odd, with the mesh grill design then a flat square then mesh grill design again..

i want a front grill that is consistent all the way through

[SLOW EP3]

i want a front grill that is consistent all the way through

x2.

[RedSiBaron]

heres my similar contribution



sanded down the stock H location and fit the 04-05 CTR H on the USDM grill.

your car looks soooo happy!!!

[chubbychu]

flippin sick. pictures dont do justice.

[PayneSkillet]

i know that when you take ths tock badge off there are 2 holes, ive done it.. so basically what you did was take off the stock badge and put a piece of plastic over it covering those 2 tiny holes... doesnt seem right to me.

regardless i think your car looks great, i think it'd look better with a jdm h or the stock one.. just my 2cents

[civictype_r04]

Looks good I like it a lot.