Dayum. O_O I noticed you stated auto UP/down. Is it the same process if you want auto DOWN for the pass side? Cause that's all I would want to mod anyways. Thanks for the knowledge though.
Originally Posted by DA9_GSR
Looks like if you want the driver front window auto up and down function, you need the RSX master window switch.
Then you have to add three wires from the master switch to the LF window motor:
Pin 5 (RED/WHT) - goes to Pin 6 of LF window motor
Pin 13 (BLU) - goes to Pin 5 of LF window motor
Pin 6 (LT GRN) - goes to Pin 4 of LF window motor
Then you have to move wire in Pin 8 (ORG) to Pin 13 in the master switch
If you want auto up and down on the RF window, you're on your own. I think you'll need to add many wires from the master LF switch all the way to the RF door switch. Not worth it in my opinion. Also, I'm not 100% sure if the RSX master window switch itself is the same shape as the EP3 switch.
Bookmarks