EP3 axles will work fine, the trans end splines are all the same for Honda's Kseries. The outer ends are vehicle specific.
Not a bad price, and the PRC harness and ECU would have to be replaced with typeS parts anyways.
quick question, i found a local person selling the ITR k20a longblock for like 2800 but it doesn't come with ecu, harness or axles.
my main question is, can i use the stock ep3 axles with the itr motor with no problem or would i need the itr axles?
thanks
EP3 axles will work fine, the trans end splines are all the same for Honda's Kseries. The outer ends are vehicle specific.
Not a bad price, and the PRC harness and ECU would have to be replaced with typeS parts anyways.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
so basically if i got this motor, all i would need is kpro (preferably on a prb ecu for the reverse lock out)?
That and an A2 harness, I think.
I would also get a A2/A3 VTEC solenoid and A2 engine harness.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
yea ep3 axles will work either get a type-R ecu or K-pro your existing ECU and your ep3 harness should work with it too...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks