Yeah, I was thinkin about doin mine to, anyone who can find the DIY your help would be greatly appreciated.
Can anyone repost the DIY Valve adjustment from a while back? It was really good and had pics and all and then it got lost in the crash i think. Was going to tackle the valves soon, but couldn't find it. Thanks
Yeah, I was thinkin about doin mine to, anyone who can find the DIY your help would be greatly appreciated.
I have the old thread printed out on paper.
Ed~
How often do you need to do this?
someone post this up. id like to know as well.
I found one buried in another post. If you go to the DIY section and find the post by Jimmyjames called "replacing your intake cam" I think it's on the 3rd page of DIY forums, you'll see down near the bottom, he has a pretty detailed write up on the process.
Hope it helps,
audleon
again, i still have this on paper, if needs be I we retype it.
Ed~
I'm thinking it might need to be re-typed, or that link needs to be fixed. Whichever comes first.
Your link has one too many hhtp://
Fixed: http://www.vtec.net/articles/view-ar...icle_id=143824
Great DIY but are the clearances for the A2 going to be the same as the A3?
Last edited by BobSassafrass; 07-24-2008 at 08:25 PM.
I just downloaded the service manual and I think these are the correct numbers:
Valve Clearance (cold): Intake - .21-.25mm
Exhaust - .28-.32mm
Intake is the same as the A2 but the exhaust is .03mm higher on the A3.
i need to check mine
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks