Anyone have Valve Adjustment DIY?

[dann_04]

Can anyone repost the DIY Valve adjustment from a while back? It was really good and had pics and all and then it got lost in the crash i think. Was going to tackle the valves soon, but couldn't find it. Thanks

[SimonEp3]

Yeah, I was thinkin about doin mine to, anyone who can find the DIY your help would be greatly appreciated.

[oneglory]

I have the old thread printed out on paper.

[Word]

How often do you need to do this?

[mormonboy]

someone post this up. id like to know as well.

[audleon]

I found one buried in another post. If you go to the DIY section and find the post by Jimmyjames called "replacing your intake cam" I think it's on the 3rd page of DIY forums, you'll see down near the bottom, he has a pretty detailed write up on the process.

Hope it helps,

audleon

[powdbyrice]

search foo!
http://www.ephatch.com/forum/showthread.php?t=44979

[oneglory]

again, i still have this on paper, if needs be I we retype it.

[BeaterEP]

I'm thinking it might need to be re-typed, or that link needs to be fixed. Whichever comes first.

[BobSassafrass]

http://http://www.vtec.net/articles/...icle_id=143824

Here is a good DIY i followed to do mine!!!

Your link has one too many hhtp://
Fixed: http://www.vtec.net/articles/view-ar...icle_id=143824

Great DIY but are the clearances for the A2 going to be the same as the A3?

[oneglory]

I will re-type it this weekend.

[BobSassafrass]

I just downloaded the service manual and I think these are the correct numbers:

Valve Clearance (cold): Intake - .21-.25mm
Exhaust - .28-.32mm

Intake is the same as the A2 but the exhaust is .03mm higher on the A3.

[03ep3 stapel]

i need to check mine