Centered Exhaust

[hempzityshizzle]

I dunno about anyone else, but I love the exhaust on the new r32s, they have it centered in the back of the car. It crossed my mind at one point that I wanted to try it on my ep3, but I couldnt find anything on it. Anyways, I stumbled across a picture of an ep3 with it like this, I loved it. Anyone know how I could do this? I dunno how to post pics, but heres the link: http://www.showstoppersusa.com/Image...1089082236.jpg

[skooba]

He was a user here way back in the day. His name was Widebody EP3. You can find his old thread (no pictures remain) here: http://www.ephatch.com/forum/showthread.php?t=27321

He said something about cutting out the spare tire well to make the exhaust fit.

[talonXracer]

It wouldnt be hard to have the exhaust make a turn towards the center just after it makes the hump over the pass side suspension, add a short resonator style muffler and then make a right hand turn with the tips. The two right hand turns will reduce the exhaust noise as well. You may need to do some sheetmetal work.

[siver-SI]

What is going to suck with that if you are a DIY guy and you loose your center jack point.

[RedSiBaron]

It wouldnt be hard to have the exhaust make a turn towards the center just after it makes the hump over the pass side suspension, add a short resonator style muffler and then make a right hand turn with the tips. The two right hand turns will reduce the exhaust noise as well. You may need to do some sheetmetal work.

hrrm...kinda reminds me of the original Si exhausts on the 86/87si and 88-91si ...hrrm


theres a reason our car had a dual tip stock...dual tips were a honda tradition with the si...

What is going to suck with that if you are a DIY guy and you loose your center jack point.

nah you could still do it i bet...

[Chazwick05]

i can still use my center jack, it's not a problem whatsoever!

[T_Virus]

Hmm...not my cup of tea...but if you go for it, props to you

[03Si757]

I Like.

[kaisertj]

Every single Kia spectra five has that conversion done near my house me..... Might look ok on an ep3.

[hempzityshizzle]

Thanks for the help, Ill figure something out, the exhaust part should me cake, its the whole bumper/skirt thing that needs some help. hahga

[proudtobeawesom]

with a kit like that it looks like it flows well

id rock it

~kevin

[RedSiBaron]

Thanks for the help, Ill figure something out, the exhaust part should me cake, its the whole bumper/skirt thing that needs some help. hahga

now what you could do is cut the opening in the lip/bumper off for the exhaust and then fill it back with fiberglass, then cut a new spot in the center and glass in the old opening, smooth it all out filler/sanding/primer and then repaint it...thats what i would do...

[RedSiBaron]

lol^^^ ?????????????

[ep3moschini]

time for me to chime in with my

[RedSiBaron]

time for me to chime in with my

OH NOES!!!!