Why the rad support? There is more than enough room without going through that much trouble.
The way you are suppose to change the a/c compressor is remove the front bumper the radiator support the a/c and radiator fan then remove the belt make sure to remember how it runs then remove the four bolts on the a/c compressor and it will be a little tight but it will pull right out the top. Make sure to not leave your a/c system open for more then a hour or so because if you do you will need to get a vacuum pulled on it to remove the moisture. to reinstall to everything in reverse and then recharge it.
Why the rad support? There is more than enough room without going through that much trouble.
That is the way that the Honda shop manual says how to do it I think of Wouk have been possible to do without doing it but you
would end up messing up a lot of the fins on the
radiator and it would be a lot more diffcult to do.
yes it works got one in my car now.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks