Does anyone know how to take off the 3 bolts that connects the lca to the trailing arm. the bolts has 8 points on them and i have never seen a 8 point socket before. has any done the bushing before?
They should be a 5 or 10 point bolt. SPC carries the correct socket to remove them, or use a Dremel or similar tool to make a slot for a straight slot,or use a big pair of vice grips to remove them,,,,Honda does not consider them removable, thusly the tamper proof bolts.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks