The duckbill actually looks pretty good, but having a flat wing is like not having a wing @ all. Refer to Ron threads for measurements on the duct.
yes i searched.. nothing cept mugen this an that from like 04!
is there directions for installing this? I'm making one this weekend with Carbon Kevlar and i'm wondering how much of my JDM front i gotta cut and how it all bolts up.. and all the other needed info. also how deep is it?
Here's the duckbill i'm currently working on also going to be mostly Carbon Kevlar..
http://www.ephatch.com/forum/showthread.php?t=47448
The duckbill actually looks pretty good, but having a flat wing is like not having a wing @ all. Refer to Ron threads for measurements on the duct.
gimmie a second and ill post a picture of the mugen instructions, i have them somewhere...
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
ok heres the deal, you want to cut out the grill in that shape they show on the bottom diagram of the 2, you then use those clips shown in the top diagram with the treaded nut on them...the 2 plate holes in the duct is where you put lisenceplate bolts through and that then holds the duct to the remaining material...along with that you use adhesive tape around the duct to hold it on...also now you have all the measurements for it too
here is a picture from the inside of a bumper with a mounted duct
are you making the 2nd duct piece that attaches to the rebar as well?
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
i think I'm the Ron he is talking about. I think Charley stepped in and gave some info. If you need any questions answered, just hit me up. Congrats on being unique
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks