Fog Light Harness/Switch

[STP03BlueSI]

Bump so I can do this with my fogs and hids being done this weeken.d.

[McTaggart34]

Opened back up. Can some one tell me how use the cruise control switch as the Fog light switch. I have an extra one.

here's a diagram I scanned of the cruise control system .



- Josh

[McTaggart34]

no one ?

[smashinvtec]

i wish i could make one. seems kinda hard tho

[talonXracer]

Opened back up. Can some one tell me how use the cruise control switch as the Fog light switch. I have an extra one.

here's a diagram I scanned of the cruise control system .



- Josh

Internally the switch is identicle to the stock foglight switch. So are you using the original cruise switch or a spare switch? You can get a stock fog switch very easily, the one that comes with the factory optional fog kit is the same exact part# as the stock typeS switch.

You will need to either procure a chassis harness end connector, or solder leads upon the switch pins.

I do believe I still have one or two fog switchs that have leads soldered onto the pins out in the garage.

[ShadowEP3]

I do believe I still have one or two fog switchs that have leads soldered onto the pins out in the garage.

how much?

[ace of spades]

I was able to achieve the same effect with my factory fogs by switching the wires in the switch.

here's the DIY:

http://www.ephatch.com/forum/showthr...121#post821121

[ShadowEP3]

bumpan


i got the OEM EP switch and i cant for the life of me figure how to complete the circut for the switch..is there any difference between the Acura switch and the Honda one? (sounds stupid..but who knows )

i can get illumination to the switch but no on/off..any help? pweeeeaaaaaaaaassseeeeee

[thisisagame24]

nope they are both exactly the same

the power for illumination and power in general are two different wires